RedMax EXZ2500S-BC manual Fueling the Unit, For Your Engine LIFE, Avoid,  21 

Page 21

7. Fuel

container to avoid mixing up with gasoline or other containers.

6.Indicate the contents on outside of container for easy identification.

FUELING THE UNIT

1.Untwist and remove the fuel cap. Rest the cap on a dustless place.

2.Put fuel into the fuel tank to 80% of the full capacity.

3.Fasten the fuel cap securely and wipe up any fuel spillage around the unit.

WARNING

1.Select bare ground for fueling.

2.Move at least 10 feet (3 meters) away from the fueling point before starting the engine.

3.Stop the engine before refueling the unit.

FOR YOUR ENGINE LIFE, AVOID;

1.FUEL WITH NO OIL(RAW GASOLINE) – It will cause severe damage to the internal engine parts very quickly.

2.GASOHOL – It can cause deterioration of rubber and/or plastic parts and disruption of engine lubrication.

3.OIL FOR 4-CYCLE ENGINE USE or WATER COOLED 2-CYCLE ENGINE USE – It can cause spark plug fouling, exhaust port blocking, or piston ring sticking.

4.Mixed fuels which have been left unused for a period of one month or more may clog the carburetor and result in the engine failing to operate properly.

21

Image 21
Contents T3087-93110 OWNER/OPERATOR ManualPage Contents Safety First 4  Parts locationEX-BC SpecificationsEX-LRT EX-PS 6  Symbols on the machine Type de moteur 1KZXS.0254QR EM Cylindrée du moteur 25,4cc 7  Working Condition For safe operationWorking Circumstance  8  9  Working PlanBefore Starting the Engine Starting the Engine 10   11  Using the ProductIf Someone Comes MaintenanceHandling Fuel  12  13  TransportationSet up Installing Cutting Head SE2 EX-BC SE1 SE2 Installing Debris GuardDebris guard Plate Screw EX-BC SE3 Balance UnitEX-LRT SE1 Attaching the Trimming Mechanism SE1 Main pipe Trimming mechanism Screw hole Fastening bolt 16  EX-PS SE2 EX-PS SE1 Attaching the Pruning Mechanism SE1EX-PS SE3  17 EX-PS SE4 EX-PS SE5 EX-PS SE6 Chain tension adjusting screw Loosen TightenHole Moving direction Chain tensioner nut  18 Clamp bolt Lock screw EX-HE SE1 EX-HE SE2 EX-HE SE3 EX-HE SE4Bracket  19 Fuel HOW to MIX FuelRecommended Mixing Ratio Gasoline 50OIL  20 Fueling the Unit For Your Engine LIFE, Avoid 21   22  OperationOP6 OP7 OP8 Stopping Engine OP6 23  Adjusting Idling Speed OP10 Adjusting Throttle CableOP9  24 EX-BC OP1 Cutting Work Line Head Usage Adjusting the Line LengthTrimming Grass and Weeds  25  26  Bracket Handle EX-BC OP4 EX-BC OP5 EX-BC OP6Cutting Method  27  28  EX-BC OP7 EX-BC OP8Operation Controlling Blade BounceHow you can reduce the chance of kick out How you can maintain the best control 29  EX-BC OP9 Maintenance Blade Transporting the Unit 30  Operation EX-LRT only Adjusting the Angle of the Cutting Blades OP1EX-LRT OP1 Clamp lever Trimming mechanismOperation EX-PS only Adjusting OIL Flow RateEX-PS OP1 EX-PS OP2 Checking OIL Supply  32  33  Operation EX-HE only EX-HE OP1 34  Maintenance Maintenance Chart 35   36  Spark Arrester MA4 MufflerSpark arrester Intake AIR Cooling VentMA51 Procedures to be Performed After Every 100 Hours of USEMA6 Cylinder Intake air cooling vent backFor safety reasons, do not use metalreinforced line Maintenance EX-BC onlyGear Case MA5  39  40  EX-LRT MA1 EX-LRT MA2Blades MA1 Quick TIPEX-PS MA1 MA2 MA3 Oiling Port Maintenance EX-PS onlyGuide BAR  41  42  EX-PS MA4 MA5 MA6Sprocket SAW Chain 43  EX-PS MA7 MA8 MA9Maintenance EX-HE only MA1 Gear Case 44   45  StorageTroubleshooting guide Check Probable Causes Action 46  EX-LRT ATT EX-PS ATT EX-HE ATT Parts list 48  EXZ-PU S/N 302845 and up 49   50  EX-BC S/N 302960 and up 51   52  Engine Unit 352001 and upDescription Part Number Qty  53  54  EX-LRT S/N 000531 and upCasing B  55  56  EX-PS S/N 000000 and up 57   58  EX-HE S/N 000101 and up 59  Manufacturer’s warranty coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans Page Komatsu Zenoah America INC