RedMax HEZ2650F manual MA7 Blade MA7, MA8 MA9, Protector, Intake AIR Cooling Vent

Page 16

HEZ2650F

9. Maintenance

MA7

 

(2)

(5)

(4)

(1)

(3)

■BLADE (MA7)

•Place the blade between holders (A) and (B) while locking the gear shaft by putting the bar, through the key holes on the holder(A) and the gearcase. Use the socket and the screwdriver to tighten the blade mounting bolt.

(1)Blade mounting nut (Left-handed) Tightning Torque:

130~150in-lbs (15~20N.m.)

(2)Holder (B)

(3)Blade

(4)Holder (A)

(5)Bar

MA8

(1)

(2)

MA9

vent or between the cylinder fins, it may cause the engine to overheat, and that in turn may cause mechanical failure on the part of the machine. (MA8)

(1)cylinder

(2)intake air cooling vent (back)

■PROTECTOR

•When you replace protector, use new bolt (T3207-24130). (MA9)

Tightning Torque:

35~52in-lbs(4.0~6.0N.m.)

IMPORTANT

•Attention to the direction of the holder

(B)

■INTAKE AIR COOLING VENT

WARNING

•Never touch the cylinder, muffler, or spark plugs with your bare hands immediately after stopping the engine. The engine can become very hot when in operation, and doing so could result in severe burns.

•When checking the machine to make sure that it is okay before using it, check the area around the muffler and remove any wood chips or leaves which have attached themselves to the machine. Failing to do so could cause the muffler to become overheated, and that this in turn could cause the engine to catch on fire. Always make sure that the muffler is clean and free of wood chips, leaves, and other waste before use.

•Check the intake air cooling vent and the area around the cylinder cooling fins after every 25 hours of use for blockage, and remove any waste which has attached itself to the machine. Note that it is necessary to remove the engine cover shown in (MA8) in order to be able to view the upper part of the cylinder.

IMPORTANT

■PROCEDURES TO BE PERFORMED AFTER EVERY 100 HOURS OF USE

MA10

1. Remove the muffler, insert a

screwdriver into the vent, and wipe

 

 

away any carbon buildup. Wipe away

 

any carbon buildup on the muffler

 

exhaust vent and cylinder exhaust port

 

at the same time.

2.Tighten all screws, bolts, and fittings.

3.Check to see if any oil or grease has worked its way in between the clutch lining and drum, and if it has wipe it away using oil-free, lead-free gasoline.

•If waste gets stuck and causes blockage around the intake air cooling

US-16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents HEZ2650F Contents Specifications Parts locationEmission Control Symbols on the machineManufactured For safe operation Before use Using the productStarting the engine Fuel safety Avoid noise problemMaintenance TransportDisposal Set up Mounting Other PartsSE1 SE2Warranty FuelFuel Gasoline RequirementsFor Your Engine LIFE, Avoid HOW to MIX Fuel Recommended Mixing Ratio Gasoline 50 OILFueling the Unit Operation OP8 HOW to USE Adjusting Throttle CableAdjusting Idling Speed OP7 Stopping Engine OP4Maintenance Maintenance ChartReplacement Plug is a NGK CMR7H MA1 AIR FilterMuffler MA4Procedures to be Performed After Every 100 Hours of USE MA7 Blade MA7MA8 MA9 ProtectorTroubleshooting guide StorageDisposal Case 1. Starting failureZenoah AMERICA, INC

HEZ2650F specifications

The RedMax HEZ2650F is a high-performance, lightweight backpack blower designed for professionals and homeowners who require an efficient and powerful tool for yard maintenance and landscaping tasks. Built to excel in various conditions, this versatile blower combines advanced technology with user-friendly features, making it a top choice in the market.

One of the standout features of the HEZ2650F is its robust engine. Powered by a reliable 25.4cc two-stroke engine, the blower delivers an impressive air velocity of up to 180 mph, providing the power needed to clear leaves, debris, and grass clippings with ease. The engine is designed to be fuel-efficient, allowing for longer run times without frequent refueling, making it ideal for extended work sessions.

The innovative Design of the HEZ2650F incorporates RedMax's advanced air flow technology. This technology optimizes the air intake and exhaust systems, ensuring that the blower operates at maximum efficiency. As a result, users can expect powerful performance without sacrificing fuel economy, which is crucial for both commercial users and dedicated homeowners.

Comfort is another key consideration in the design of the HEZ2650F. The backpack design distributes weight evenly across the user's back, significantly reducing fatigue during prolonged use. Additionally, the padded shoulder straps and ergonomic handle provide added comfort, allowing users to maneuver the blower effortlessly in tight spaces.

The blower is equipped with a cruise control feature that enables users to maintain a consistent airflow without having to hold down the throttle trigger constantly. This feature enhances productivity and allows for longer periods of operation without fatigue. Moreover, the lightweight construction of the HEZ2650F makes it easier to handle, even for those who may not be accustomed to operating heavy machinery.

Durability is also a hallmark of the RedMax HEZ2650F. Its rugged design is built to withstand the rigors of professional use, ensuring that it can handle tough landscaping tasks season after season. The blower's components are crafted from high-quality materials that resist wear and tear, enhancing its longevity.

In summary, the RedMax HEZ2650F is an outstanding backpack blower that combines a powerful engine, advanced air flow technology, and user-focused features. With its lightweight design, comfort enhancements, and durable construction, it stands out as one of the best options for anyone looking to maintain their outdoor spaces efficiently. Whether for professional landscapers or dedicated homeowners, the HEZ2650F is a reliable choice for effective yard care.
Top Page Image Contents