7. Operation
F19
■HOW TO SWITCH BETWEEN OPERATING MODES (F19)
1.Flip the engine switch to turn off the engine.
2.Remove the cover to the air filter, remove the air filter, and then remove the choke knob from the cylinder cover.
3.Loosen the screws holding the cylinder cover in place (i.e., the three screws on the inside and the one screw on the outside of the cover), and then remove the cylinder cover.
4.Press with your finger down on the icing cap located on the
5.Adjust the icing cap so that the ‘snow’ mark faces upwards and then return it to its original position in the cylinder cover.
6.Fix the cylinder cover back into its original position, and then fix all other parts back into their proper positions.
(1)Choke knob
(2)Cylinder cover
(3)Icing cap
16