Adams 22 manual Trouble Shooting Chart

Page 18

TROUBLE SHOOTING CHART

The Engine will not start.

1.Make sure the fuel tank is filled with clean gasoline. Do not use old gasoline.

2.On a cold engine, push the primer button (optional on some models). For the number of times required to push the primer button, see the engine manufacturer’s instructions.

3.Make sure the wire for the spark plug is connected to the spark plug.

4.Adjust the Carburetor. See the “Engine Instruction Book”.

5.There is too much gasoline in the engine cylinder. Remove and dry the spark plug. Pull the re- coil-start grip several times. Install the spark plug. Connect the wire to the spark plug. Start the engine.

6.The engine is difficult to start in heavy or high grass. Move the mower to a clean dry surface.

7.Make sure the engine stop lever is in the operating position.

8.Make sure the fuel valve is in the ON position. See the “Engine Instruction Book”.

9.On Electric Start models, charge the battery.

The Engine will not stop.

1.Release the engine stop lever.

2.Check the engine stop cable. Replace the cable if bent or damaged.

The Engine performance is bad.

1.Check the height of cut settings. Raise the height of cut if the grass is high.

2.Check the bottom of the blade housing. Clean the blade housing of grass and other debris.

3.Check the wire to the spark plug. Make sure the wire is connected.

4.Clean the engine cooling fins of grass and other debris.

5.Check the carburetor adjustments. See the “Engine Instruction Book”.

6.Check the spark plug gap. Set the spark plug gap at 0.030”.

7.Check the amount of oil in the engine. Fill with oil if necessary.

8.Check the engine air cleaner. See the “Engine Instruction Book”.

9.The gasoline is bad. Drain and clean the fuel tank. Fill the fuel tank with clean gasoline.

Excessive Vibration.

1.Remove the blade. Check the blade and balance if necessary. See the blade maintenance instructions.

2.Check for a bent or broken blade. A DAMAGED BLADE IS DANGEROUS AND MUST BE REPLACED.

3.Check the blade adapter. REPLACE A BROKEN BLADE ADAPTER.

4.If the vibration continues, take the mower to an Authorized Service Center.

The grass will not discharge correctly.

1.Clean the bottom of the mower housing.

2.Check for a badly worn blade. Remove and sharpen the blade. For safety, replace the blade every two years with a factory replacement blade.

The grass is not cut even.

1.

Check the height adjustment at each wheel. The height adjustment must be the same for each

 

wheel.

 

2.

Make sure the blade is sharp.

 

3.

Check for a bent or broken blade. A DAMAGED BLADE IS DANGEROUS AND MUST BE

 

REPLACED.

 

4.

Check for a broken blade adapter. REPLACE A BROKEN BLADE ADAPTER.

F-050414L

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Models MURRAY, INC. Two Year Limited Warranty OWNER’S Information Responsibility of the OwnerSafe Operation Practices for Walk-Behind Mowers General OperationII. Slope Operation IV. Service Use only original equipment or authorized replacement partsIII. Children They can help you learn. Too often the mow Safe Mowing GuideTices. Read the next few pages carefully Read this Instruction Book. ReadAccessory and the mower Make the clean up after mowing easierAdjustment,except carburetor, while the en Bruises, or even put out an eye. Often the perAuthorized Service Center for your brand Stitutions as service parts. If you need profesSional service, select a shop that is an Mower. If you plan to service the unit yourselfWhen the front of the mower has come up Ufacturer’s recommended replacement partBefore using the grass catcher again Cause. Vibration is generally a warningSteps to Follow Before Mowing While MowingAfter Mowing Handle PreparationUnpacking Instructions Remove the washers and axle knobsHandle Handle BracketHigh Position LOW PositionHOW to Prepare the Engine Final AssemblyOperation HOW to Stop the EngineHOW to Start Engine Engine Stop LeverHOW to Clean HOW to Adjust Mower Housing Height of CUT MaintenanceEngine Maintenance LubricationBlade Service HOW to Sharpen the BladeHOW to Remove the Blade Folding Handle Storage HOW to Prepare the MowerCheck the Level of CUT For StorageTrouble Shooting Chart 050414L Handle Briggs & Stratton Models KEY DescriptionHandle Tecumseh Engine Models Models with Standard Wheels 1101303E700 1101302E700Wheels and Tires Wheel Size & Type050414L 050414L 050414L HOW to Order Repair Parts MURRAY, INC. Lawn Mower Central Parts Distributors

22 specifications

Adams 22 is a cutting-edge software platform designed to streamline and enhance the management of complex systems in various industries. Known for its versatility and robustness, Adams 22 offers a comprehensive suite of features that cater to the needs of engineers, designers, and project managers.

One of the standout features of Adams 22 is its advanced modeling capabilities. The platform allows users to create highly detailed and accurate simulations of mechanical systems. This includes the ability to model both rigid and flexible bodies, enabling engineers to analyze how components interact under various conditions. The software supports state-of-the-art visualization tools, allowing teams to view, manipulate, and understand complex systems in real time.

Adams 22 also excels in its integration with other engineering software. It seamlessly connects with CAD applications, enabling users to import designs directly into the simulation environment. This integration reduces errors and accelerates the design process, as engineers can quickly test and iterate on their models without the need for extensive rework.

Another key characteristic of Adams 22 is its powerful simulation algorithms. The platform employs advanced numerical methods to solve dynamic equations, providing users with accurate and reliable results. This consistency is vital for engineering applications where precision is crucial, such as in automotive and aerospace industries. Additionally, Adams 22 incorporates various solver options, allowing users to choose the best approach for their specific simulation needs.

User-friendliness is also a hallmark of Adams 22. The intuitive interface is designed to cater to both novice and experienced users, facilitating a smooth learning curve. Comprehensive documentation and a supportive community foster an environment conducive to knowledge sharing and collaboration.

The software also includes robust optimization tools, which enable users to fine-tune their designs for performance, weight, and cost. By leveraging advanced algorithms, Adams 22 helps engineers identify the best design alternatives, enhancing the efficiency of the development process.

In summary, Adams 22 is a versatile and powerful platform that transforms the way engineers and designers approach complex simulations. With its innovative features, seamless integration, and user-friendly design, it stands out as a vital tool for modern engineering applications. As industries continue to evolve, Adams 22 remains at the forefront, providing the technologies necessary to meet the challenges of tomorrow.
Top Page Image Contents