Adams 22 III. Children, IV. Service, Use only original equipment or authorized replacement parts

Page 5

IMPORTANT

DO NOT:

Do not mow near drop-offs, ditches, or em- bankments. The operator could lose footing or balance.

Do not mow excessively steep slopes.

Do not mow on wet grass. Reduced footing could cause slipping.

III. Children

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the mower and the mowing activity. Never assume that children will remain where you last saw them.

1.Keep children out of the mowing area and under the watchful care of a responsible adult.

2.Be alert and turn mower off if children enter the area.

3.Before and while moving backwards, look behind and down for small children.

4.Never allow children to operate the mower.

5.Use extra care when approaching blind cor- ners, shrubs, trees, or other objects that may obscure vision.

IV. Service

*1. Use extra care in handling gasoline and oth- er fuels. They are flammable and vapors are explosive.

a.Use only an approved container.

b.Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke.

c.Never refuel the machine indoors.

d.Never store the machine or fuel contain- er inside where there is an open flame, such as a water heater.

*2. Never run an engine indoors or inside a closed area.

3.Never make adjustments or repairs to items such as the height adjusters or grass catch- er with the engine (motor) running. Discon-

nect the spark plug wire, and keep the wire away from the plug to prevent accidental starting. Always wear eye protection when you make adjustments or repairs.

4.Keep all nuts and bolts, especially blade at- tachment bolts, tight and keep equipment in good condition.

5.Never tamper with safety devices. Check their proper operation regularly.

6.To reduce fire hazard, keep mower free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage. Allow mower to cool before storing.

7.Stop and inspect the equipment if you strike an object. Repair, if necessary, before re- starting.

8.Never attempt to make wheel height adjust- ments while the engine (motor) is running.

9.Always disconnect electric mowers (live op- erated) before cleaning, repairing, or ad- justing.

10.Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer’s recom- mended parts, when necessary. For stor- age, always make sure grass catcher is empty.

11.Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

12.Do not change the engine governor setting or over-speed the engine.

13.Frequently check the blade for wear or dam- ages such as cracks and nicks. A blade that is bent or damaged must be immediately re- placed with a factory replacement blade. For safety and good cutting performance, replace the blade every two years. Fre- quently check the blade bolt and the engine mounting bolts. Replace damaged bolts and tighten loose bolts.

14.Use only original equipment or authorized replacement parts.

 

* Asterisked items do not apply to electric mowers.

F-050414L

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Models MURRAY, INC. Two Year Limited Warranty Responsibility of the Owner OWNER’S InformationII. Slope Operation Safe Operation Practices for Walk-Behind MowersGeneral Operation III. Children IV. ServiceUse only original equipment or authorized replacement parts Tices. Read the next few pages carefully Safe Mowing GuideThey can help you learn. Too often the mow Read this Instruction Book. ReadAdjustment,except carburetor, while the en Make the clean up after mowing easierAccessory and the mower Bruises, or even put out an eye. Often the perSional service, select a shop that is an Stitutions as service parts. If you need profesAuthorized Service Center for your brand Mower. If you plan to service the unit yourselfBefore using the grass catcher again Ufacturer’s recommended replacement partWhen the front of the mower has come up Cause. Vibration is generally a warningAfter Mowing Steps to Follow Before MowingWhile Mowing Unpacking Instructions PreparationHandle Remove the washers and axle knobsHigh Position Handle BracketHandle LOW PositionFinal Assembly HOW to Prepare the EngineHOW to Start Engine HOW to Stop the EngineOperation Engine Stop LeverEngine Maintenance MaintenanceHOW to Clean HOW to Adjust Mower Housing Height of CUT LubricationHOW to Remove the Blade Blade ServiceHOW to Sharpen the Blade Check the Level of CUT HOW to Prepare the MowerFolding Handle Storage For StorageTrouble Shooting Chart 050414L KEY Description Handle Briggs & Stratton ModelsHandle Tecumseh Engine Models Models with Standard Wheels 1101302E700 1101303E700Wheel Size & Type Wheels and Tires050414L 050414L 050414L MURRAY, INC. Lawn Mower Central Parts Distributors HOW to Order Repair Parts

22 specifications

Adams 22 is a cutting-edge software platform designed to streamline and enhance the management of complex systems in various industries. Known for its versatility and robustness, Adams 22 offers a comprehensive suite of features that cater to the needs of engineers, designers, and project managers.

One of the standout features of Adams 22 is its advanced modeling capabilities. The platform allows users to create highly detailed and accurate simulations of mechanical systems. This includes the ability to model both rigid and flexible bodies, enabling engineers to analyze how components interact under various conditions. The software supports state-of-the-art visualization tools, allowing teams to view, manipulate, and understand complex systems in real time.

Adams 22 also excels in its integration with other engineering software. It seamlessly connects with CAD applications, enabling users to import designs directly into the simulation environment. This integration reduces errors and accelerates the design process, as engineers can quickly test and iterate on their models without the need for extensive rework.

Another key characteristic of Adams 22 is its powerful simulation algorithms. The platform employs advanced numerical methods to solve dynamic equations, providing users with accurate and reliable results. This consistency is vital for engineering applications where precision is crucial, such as in automotive and aerospace industries. Additionally, Adams 22 incorporates various solver options, allowing users to choose the best approach for their specific simulation needs.

User-friendliness is also a hallmark of Adams 22. The intuitive interface is designed to cater to both novice and experienced users, facilitating a smooth learning curve. Comprehensive documentation and a supportive community foster an environment conducive to knowledge sharing and collaboration.

The software also includes robust optimization tools, which enable users to fine-tune their designs for performance, weight, and cost. By leveraging advanced algorithms, Adams 22 helps engineers identify the best design alternatives, enhancing the efficiency of the development process.

In summary, Adams 22 is a versatile and powerful platform that transforms the way engineers and designers approach complex simulations. With its innovative features, seamless integration, and user-friendly design, it stands out as a vital tool for modern engineering applications. As industries continue to evolve, Adams 22 remains at the forefront, providing the technologies necessary to meet the challenges of tomorrow.
Top Page Image Contents