Adams 22 Use only original equipment or approved sub, Sional service, select a shop that is an

Page 8

SAFE MOWING GUIDE

Use only original equipment or approved sub-

in the rain is no fun and it is dangerous. Always

stitutions as service parts. If you need profes-

seek shelter in an electrical storm. In extreme-

sional service, select a shop that is an

ly dry mowing conditions, your safety glasses

Authorized Service Center for your brand of

can serve a dual purpose by protecting your

mower. If you plan to service the unit yourself,

eyes from dust and thrown objects, also a dust

follow directions in the Instruction Book.

or pollen mask can be helpful.

As you mow, remember children and pets are

Your mower is equipped with a number of safe-

sometimes attracted to the activity. Be espe-

ty features which are important to the safety of

cially careful when trimming around shrubbery

the operator and bystanders and must never

or when backing up. If at all possible, don’t

be altered or removed. If a safety feature be-

mow when moving backwards. It is dangerous

comes inoperable, lost, or damaged, it must be

because vision is restricted. Also, blades are

repaired or replaced before the mower is used.

designed to cut while the unit is moving for-

Engine speed is a key to safe mowing and a

ward so cutting performance is reduced when

nice looking lawn. The maximum speed of the

mowing in reverse.

engine on your mower has been set at the fac-

Never leave the mower running and unat-

tory. Do not change the engine governor in any

tended. Shut off the engine. Put the mower in

way.

 

a position so that it can not roll. If the unit is

Select the maximum engine and ground speed

self-propelled, make sure the drive control is

that is right for the terrain and the height of

disengaged.

grass. You get the best cutting and bagging

 

performance when using a grass catcher by

 

operating the engine at maximum speed. Nev-

 

er walk fast or run just to get the job done soon-

 

er. On inclines, reduce ground speed and

 

exercise extreme care.

 

It is best to mow only during daylight hours;

 

however, if you must mow in the late afternoon

 

or evening, make sure there is good artificial

 

light.

 

 

Your mower will require maintenance including

 

service and adjustments before and after use

 

as with any machine. The frequency of the

 

maintenance is generally based on hours of

 

use, however, the frequency can vary because

 

of mowing conditions. Check the Instruction

 

Book for more detailed instructions. Proper

When mowing, be aware of your condition and

maintenance protects your investment in the

mower and helps insure that it will function

the weather conditions. After mowing a long

safely and reliably.

time, you will be tired. This is the time when

Never

attempt any

reactions slow down, your attention wanders;

service (with the pos-

the time when you are wide open for an acci-

sible exception of car-

dent. Take a short break. If temperatures are

buretor

adjustment)

high, take precautions to avoid becoming de-

with the engine run-

hydrated. If you are angry, tired, or unable to

ning. After turning the

give your full attention to mowing, if you have

engine

off, always

been consuming alcohol, medicines, or drugs,

disconnect the spark

do not use your mower or any type of power

plug wire to prevent

equipment.

accidental restarting

If weather conditions become worse while you

while the unit is being

are cutting, stop and finish later. Cutting grass

serviced.

F-050414L

8

 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Models MURRAY, INC. Two Year Limited Warranty OWNER’S Information Responsibility of the OwnerII. Slope Operation Safe Operation Practices for Walk-Behind MowersGeneral Operation III. Children IV. ServiceUse only original equipment or authorized replacement parts Safe Mowing Guide Tices. Read the next few pages carefullyThey can help you learn. Too often the mow Read this Instruction Book. ReadMake the clean up after mowing easier Adjustment,except carburetor, while the enAccessory and the mower Bruises, or even put out an eye. Often the perStitutions as service parts. If you need profes Sional service, select a shop that is anAuthorized Service Center for your brand Mower. If you plan to service the unit yourselfUfacturer’s recommended replacement part Before using the grass catcher againWhen the front of the mower has come up Cause. Vibration is generally a warningAfter Mowing Steps to Follow Before MowingWhile Mowing Preparation Unpacking InstructionsHandle Remove the washers and axle knobsHandle Bracket High PositionHandle LOW PositionHOW to Prepare the Engine Final AssemblyHOW to Stop the Engine HOW to Start EngineOperation Engine Stop LeverMaintenance Engine MaintenanceHOW to Clean HOW to Adjust Mower Housing Height of CUT LubricationHOW to Remove the Blade Blade ServiceHOW to Sharpen the Blade HOW to Prepare the Mower Check the Level of CUTFolding Handle Storage For StorageTrouble Shooting Chart 050414L Handle Briggs & Stratton Models KEY DescriptionHandle Tecumseh Engine Models Models with Standard Wheels 1101303E700 1101302E700Wheels and Tires Wheel Size & Type050414L 050414L 050414L HOW to Order Repair Parts MURRAY, INC. Lawn Mower Central Parts Distributors

22 specifications

Adams 22 is a cutting-edge software platform designed to streamline and enhance the management of complex systems in various industries. Known for its versatility and robustness, Adams 22 offers a comprehensive suite of features that cater to the needs of engineers, designers, and project managers.

One of the standout features of Adams 22 is its advanced modeling capabilities. The platform allows users to create highly detailed and accurate simulations of mechanical systems. This includes the ability to model both rigid and flexible bodies, enabling engineers to analyze how components interact under various conditions. The software supports state-of-the-art visualization tools, allowing teams to view, manipulate, and understand complex systems in real time.

Adams 22 also excels in its integration with other engineering software. It seamlessly connects with CAD applications, enabling users to import designs directly into the simulation environment. This integration reduces errors and accelerates the design process, as engineers can quickly test and iterate on their models without the need for extensive rework.

Another key characteristic of Adams 22 is its powerful simulation algorithms. The platform employs advanced numerical methods to solve dynamic equations, providing users with accurate and reliable results. This consistency is vital for engineering applications where precision is crucial, such as in automotive and aerospace industries. Additionally, Adams 22 incorporates various solver options, allowing users to choose the best approach for their specific simulation needs.

User-friendliness is also a hallmark of Adams 22. The intuitive interface is designed to cater to both novice and experienced users, facilitating a smooth learning curve. Comprehensive documentation and a supportive community foster an environment conducive to knowledge sharing and collaboration.

The software also includes robust optimization tools, which enable users to fine-tune their designs for performance, weight, and cost. By leveraging advanced algorithms, Adams 22 helps engineers identify the best design alternatives, enhancing the efficiency of the development process.

In summary, Adams 22 is a versatile and powerful platform that transforms the way engineers and designers approach complex simulations. With its innovative features, seamless integration, and user-friendly design, it stands out as a vital tool for modern engineering applications. As industries continue to evolve, Adams 22 remains at the forefront, providing the technologies necessary to meet the challenges of tomorrow.
Top Page Image Contents