Simplicity 24HP manual Features & Controls, Control Functions

Page 15

Features & Controls

Controls

CONTROL FUNCTIONS

The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section.

Ground Speed Control Levers

These levers control the ground speed of the rider. The left lever controls the left rear drive wheel and the right controls the right rear drive wheel.

Moving a lever forward increases the FORWARD speed of the associated wheel, and pulling back on a lever increases the REVERSE speed.

The further a lever is moved away from the neutral position the faster the drive wheel will turn.

See the OPERATION section for steering instructions.

Throttle Control

The throttle controls engine speed. Move the throttle forward to increase engine speed and back to decrease engine speed. Always operate at FULL throttle.

12

Choke

Close the choke for cold starting. Open the choke once the engine starts. A warm engine may not require choking. Move the lever forward to close the choke. Move the lever back to open the choke.

Ignition Switch

The ignition switch starts and stops the engine; it has three positions:

OFF	Stops the engine and shuts off the
	electrical system.
RUN	Allows the engine to run and powers
	the electrical system.
START	Cranks the engine for starting.

NOTE: Never leave the ignition switch in the RUN position with the engine stopped–this drains the battery.

www.simplicitymfg.com www.snapper.com

Image 15

Contents 24HP Zero-Turn Riders OPERATOR’S ManualPage Date Purchased Table of Contents Safety Rules & Information Operating SafetySlope Operation Retaining Walls, Drop-offs, and Water General Operation Slope Operation Safety Rules and InformationSafe Handling of Gasoline Service & MaintenanceCE Identification TAG Markings Identification Numbers CE Export Models Safety Decals Safety Decals North American ModelsOperational Safety Checks Safety Interlock SystemNorth American Models only Safety Interlock System Export Models only Safety Interlock SystemServicing Safety IconsNorth American Safety Icons CE Export Safety IconsControl Functions Features & ControlsTransmission Oil Fill PTO SwitchSeat Adjustment Lever Hour MeterGeneral Operating Safety OperationChecks Before Starting Starting the Engine Stopping the Rider and EnginePushing the Rider by Hand Reverse Travel Practice Zero Turn Driving PracticeSmooth Travel Forward Travel PracticeTurning Practice Turning Around a CornerExecuting an End-Of-Row Zero Turn Executing TurnsMower Removal Installation InstallationRemoval Tall Grass Requires Incremental Cutting MowingMowing Recommendations Height of GrassProper Broadcast Mowing When and How Often to MowMowing Methods Mowing PatternsProper Mulching Attaching a TrailerRegular Maintenance Before Every Spring Each Hours 100 200 Fall UseCheck Transmission Oil Change Transmission Oil Filter Arm Pivot LubricationGrease OilServicing the Mower Blades Removing the Mower BladeInspecting the Mower Blades Nail Reinstalling the Mower BladesSharpening the Mower Blade Balancing the Mower BladesTire Pressure Check Tire PressuresAdding Fuel Fuel FilterChange Engine OIL & Filter Engine MaintenanceCheck / Fill Transmission OIL Transmission OIL Filter ChangeChange Interval Every 200 Hours Battery Maintenance Cleaning the Battery and CablesStorage Troubleshooting the Rider Troubleshooting, Adjustments, & ServiceTroubleshooting the Mower Troubleshooting, Adjustments, & ServiceStreaking Troubleshooting Common Cutting ProblemsSeat Adjustment Ground Speed Control Lever AdjustmentSeat Position Adjustment Speed Balancing Adjustment Cutting Height AdjustmentNeutral Adjustment Suspension Adjustment A. Front Shock Adjustment Collar Parking Brake AdjustmentBlade Brake Check PTO Clutch AdjustmentOrient Blades Side-to-Side Mower Deck LevelingRoller BAR Leveling Select Models Mower Belt ReplacementBattery Charging Hydraulic Pump Drive Belt ReplacementTechnical Manuals SpecificationsPage Belts and Blades Tractor Product Quick Specs