Simplicity 24HP manual Hour Meter, PTO Switch, Transmission Oil Fill, Transmission Release Levers

Page 16

Hour Meter

The hour meter measures the number of hours the key has been in the RUN position.

Note: The hour meter will register the passage of time when the key is in the RUN position, even if the engine is not running. The hour meter has a self contained power source so the total hours are always visible.

PTO Switch

The PTO (Power Take-Off) switch engages and disengages attachments that use the PTO. To engage the PTO, pull UP on the switch. Push DOWN to disengage. Note that the operator must be seated firmly in the rider seat for the PTO to function.

Transmission Oil Fill

Transmission oil is added through the transmission oil reservoirs. It also serves as extra holding capacity for oil as the transmissions heat up and the oil expands.

See CHECK TRANSMISSION OIL LEVEL for oil level check and fill procedures.

Transmission Release Levers

The transmission release levers deactivate the transmissions so that the unit can be pushed by hand. See PUSHING THE UNIT BY HAND for operational information.

Seat Adjustment Lever

The seat can be adjusted forward and backward. Move the adjustment lever towards the left, slide the seat to the desired position, and release the lever.

Features & Controls

Fuel Tank

Fuel Level Gauge

To remove the cap, turn counterclockwise. The fuel gauge is mounted in the fuel tank and indicates the amount of fuel in the tank.

Mower Height of Cut Adjustment &

Attachment Lift Control Lever

To adjust cutting height, pull the large lever back fully to lock the control in the attachment raised transport position. Position the cutting height selector pin on the appropriate hole to achieve the desired cutting height. Pull back on the small lift latch lever and large lever simultaneously, and lower the mower into cutting position.

For attachment transport lift, pull the large lift lever back fully to lock the control in the attachment raised transport position.

Parking Brake

DISENGAGE

Releases the parking brake.

ENGAGE

Locks the parking brake.

Pull the parking brake lever back to engage the parking brake. Move the lever fully forward to disengage the parking brake. NOTE: To start the unit the parking brake must be engaged.

Controls

13

Page 15 Page 17
Image 16
Page 15 Page 17
Contents OPERATOR’S Manual 24HP Zero-Turn RidersPage Date Purchased Table of Contents Operating Safety Safety Rules & InformationSlope Operation Retaining Walls, Drop-offs, and Water General Operation Safety Rules and Information Slope OperationService & Maintenance Safe Handling of GasolineIdentification Numbers CE Identification TAG MarkingsSafety Decals Safety DecalsNorth American Models CE Export Models Safety Interlock System North American Models only Safety Interlock System Export Models only Safety Interlock System Operational Safety ChecksSafety Icons North American Safety IconsCE Export Safety Icons ServicingFeatures & Controls Control FunctionsPTO Switch Seat Adjustment LeverHour Meter Transmission Oil FillOperation General Operating SafetyChecks Before Starting Stopping the Rider and Engine Starting the EnginePushing the Rider by Hand Zero Turn Driving Practice Smooth TravelForward Travel Practice Reverse Travel PracticePractice Turning Around a Corner Executing an End-Of-Row Zero TurnExecuting Turns TurningInstallation Mower Removal InstallationRemoval Mowing Mowing RecommendationsHeight of Grass Tall Grass Requires Incremental CuttingWhen and How Often to Mow Mowing MethodsMowing Patterns Proper Broadcast MowingAttaching a Trailer Proper MulchingBefore Every Spring Each Hours 100 200 Fall Use Regular MaintenanceCheck Transmission Oil Change Transmission Oil Filter Lubrication GreaseOil Arm PivotRemoving the Mower Blade Servicing the Mower BladesInspecting the Mower Blades Reinstalling the Mower Blades Sharpening the Mower BladeBalancing the Mower Blades NailCheck Tire Pressures Adding FuelFuel Filter Tire PressureEngine Maintenance Change Engine OIL & FilterTransmission OIL Filter Change Check / Fill Transmission OILChange Interval Every 200 Hours Cleaning the Battery and Cables Battery MaintenanceStorage Troubleshooting, Adjustments, & Service Troubleshooting the RiderTroubleshooting, Adjustments, & Service Troubleshooting the MowerTroubleshooting Common Cutting Problems StreakingGround Speed Control Lever Adjustment Seat AdjustmentSeat Position Adjustment Cutting Height Adjustment Speed Balancing AdjustmentNeutral Adjustment Parking Brake Adjustment Suspension Adjustment A. Front Shock Adjustment CollarPTO Clutch Adjustment Blade Brake CheckMower Deck Leveling Orient Blades Side-to-SideMower Belt Replacement Roller BAR Leveling Select ModelsHydraulic Pump Drive Belt Replacement Battery ChargingSpecifications Technical ManualsPage Product Quick Specs Belts and Blades Tractor
Top Page Image Contents