Simplicity 24HP Starting the Engine, Stopping the Rider and Engine, Pushing the Rider by Hand

Page 18

WARNING

If you do not understand how a specific control functions, or have not yet thoroughly read the FEATURES & CONTROLS section, do so now. Do NOT attempt to operate the tractor without first becoming familiar with the location and function of ALL controls.

STARTING THE ENGINE

1.While sitting in the operator’s seat, engage the parking brake and make sure the PTO switch is disengaged and the motion control handles are locked in the NEUTRAL position.

2.NOTE: A warm engine may not require choking.

Set the engine throttle control to FAST throttle position. Then fully close the choke by pulling the knob OUT fully.

3.Insert the key into the ignition switch and turn it to

START.

4.After the engine starts, gradually open the choke (push knob down fully). Reduce to half throttle speed and allow the engine to warm up.

Warm up the engine by running it for at least a minute before engaging the PTO switch or driving the rider.

5.After warming the engine, ALWAYS operate the unit at FULL THROTTLE when mowing.

In the event of an emergency the engine can be stopped by simply turning the ignition switch to STOP. Use this method only in emergency situations. For normal engine shut down follow the procedure given in STOPPING THE RIDER.

STOPPING THE RIDER AND ENGINE

1.Returning the ground speed control levers to the middle position will stop tractor movement. Pivot the levers outward and lock them in NEUTRAL.

2.Disengage the PTO by pushing down on the PTO switch.

3.Engage the parking brake by pulling the handle up until it locks into position.

4.Move the throttle control to mid-throttle position and turn the ignition key to OFF. Remove the key.

Operation

DO NOT TOW RIDER

Towing the unit will cause transmission damage. Do not use another vehicle to push or pull this unit.

PUSHING THE RIDER BY HAND

1.Disengage the PTO, engage the parking brake, turn the ignition OFF, and remove the key.

2.Locate the transmission release levers (A, Figure 2) by the rear wheels of the unit.

3.Pull both levers back and out so that they lock in the disengaged (free-wheel) position (C).

4.Disengage the parking brake.

The tractor can now be pushed by hand.

5.After moving the tractor, re-engage the transmissions by pulling the transmission release levers rearward and inward to release them from the disengaged position and then allow them to move to the engaged (drive) position (B).

A

B

C

Figure 2. Transmission Release Levers

A.Transmission Release Levers

B.Engaged Position (Drive Position)

C.Disengaged Position (Free-wheel Position)

Operation

15

Page 17 Page 19
Image 18
Page 17 Page 19
Contents OPERATOR’S Manual 24HP Zero-Turn RidersPage Date Purchased Table of Contents Operating Safety Safety Rules & InformationSlope Operation Retaining Walls, Drop-offs, and Water General Operation Safety Rules and Information Slope OperationService & Maintenance Safe Handling of GasolineIdentification Numbers CE Identification TAG MarkingsNorth American Models Safety DecalsSafety Decals CE Export ModelsExport Models only Safety Interlock System Safety Interlock SystemNorth American Models only Safety Interlock System Operational Safety ChecksCE Export Safety Icons Safety IconsNorth American Safety Icons ServicingFeatures & Controls Control FunctionsHour Meter PTO SwitchSeat Adjustment Lever Transmission Oil FillGeneral Operating Safety OperationChecks Before Starting Starting the Engine Stopping the Rider and EnginePushing the Rider by Hand Forward Travel Practice Zero Turn Driving PracticeSmooth Travel Reverse Travel PracticeExecuting Turns Practice Turning Around a CornerExecuting an End-Of-Row Zero Turn TurningMower Removal Installation InstallationRemoval Height of Grass MowingMowing Recommendations Tall Grass Requires Incremental CuttingMowing Patterns When and How Often to MowMowing Methods Proper Broadcast MowingAttaching a Trailer Proper MulchingRegular Maintenance Before Every Spring Each Hours 100 200 Fall UseCheck Transmission Oil Change Transmission Oil Filter Oil LubricationGrease Arm PivotServicing the Mower Blades Removing the Mower BladeInspecting the Mower Blades Balancing the Mower Blades Reinstalling the Mower BladesSharpening the Mower Blade NailFuel Filter Check Tire PressuresAdding Fuel Tire PressureEngine Maintenance Change Engine OIL & FilterCheck / Fill Transmission OIL Transmission OIL Filter ChangeChange Interval Every 200 Hours Battery Maintenance Cleaning the Battery and CablesStorage Troubleshooting, Adjustments, & Service Troubleshooting the RiderTroubleshooting, Adjustments, & Service Troubleshooting the MowerTroubleshooting Common Cutting Problems StreakingSeat Adjustment Ground Speed Control Lever AdjustmentSeat Position Adjustment Speed Balancing Adjustment Cutting Height AdjustmentNeutral Adjustment Parking Brake Adjustment Suspension Adjustment A. Front Shock Adjustment CollarPTO Clutch Adjustment Blade Brake CheckMower Deck Leveling Orient Blades Side-to-SideMower Belt Replacement Roller BAR Leveling Select ModelsHydraulic Pump Drive Belt Replacement Battery ChargingSpecifications Technical ManualsPage Product Quick Specs Belts and Blades Tractor

24HP specifications

Simplicity 24HP is a compact yet powerful riding lawn mower that epitomizes efficiency and user-friendliness in outdoor maintenance. With a robust 24-horsepower engine, this mower is designed to tackle a variety of terrain and vegetation, making it a reliable choice for both residential and commercial lawn care.

One of the standout features of the Simplicity 24HP is its unique Free Floating Mower Deck. This innovative design allows the deck to independently follow the contours of the ground, ensuring a consistent cut regardless of uneven surfaces. The result is a beautifully manicured lawn that can be achieved with minimal effort. The mower offers a cutting width of 50 inches, providing an efficient mowing experience that can cover larger areas quickly.

Equipped with a hydrostatic transmission, the Simplicity 24HP provides smooth power delivery and ease of operation. This technology allows for effortless speed adjustments without the need for gear shifting, giving operators precise control over their mowing speed. The ergonomic control layout ensures that all necessary functions are easily accessible from the driver's seat, enhancing overall comfort during longer mowing sessions.

The mower is also designed with durability in mind. Its heavy-duty steel construction ensures longevity and can withstand the rigors of regular use. The reinforced frame and high-quality components contribute to a reliable machine that requires minimal maintenance.

Safety features play a vital role in the design of the Simplicity 24HP. The mower is equipped with a safety switch that automatically shuts off the engine when the operator leaves the seat, preventing potential accidents. Additionally, the machine has accessible controls and indicators designed with user safety as a priority.

Moreover, the Simplicity 24HP boasts versatility with its optional attachments, including snow throwers, tillers, and baggers. This adaptability allows users to extend the utility of their mower beyond just lawn care, proving to be a valuable year-round investment.

In summary, the Simplicity 24HP combines powerful performance, advanced technologies, and thoughtful features to deliver an exceptional mowing experience. Whether for residential lawns or larger commercial properties, this mower is well-equipped to meet the needs of any user, making yard maintenance easier and more enjoyable.
Top Page Image Contents