Simplicity 7800072 Engine, Chassis, CE Compliance Specifications Transmissions, Dimensions

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.

* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.

ENGINE:

18.5 HP* Briggs & Stratton

Make	Briggs & Stratton
Model	18.5 hp Intek
Horsepower	18.5	@ 2550 rpm
Displacement	30.6	Cu. in (502 cc)
Electrical System	12 Volt, 9 amp. Alternator, Battery: 230 CCA
Oil Capacity	48 Oz. (1.4 L) w/ Filter

CHASSIS:

Fuel Tank	Capacity: 3.0 Gallons (11.4 L)
Rear Wheels	Tire Size: 18 x 8.50-8
	Inflation Pressure: 15 psi (1,03 bar)
Front Wheels	Tire Size: 11 x 4.00-5
	Inflation Pressure: 25 psi (1,72 bar)

CE COMPLIANCE SPECIFICATIONS:

TRANSMISSIONS:

Hydro-Gear

ZA-DHBB-2D5A-2DCX (LH)

ZA-AHBB-2D5A-2DCX (RH)

Type	EZT
Hydraulic Fluid	Sealed Unit
Speeds	Forward: 0-6.2 MPH (0-9.98 km/h)
@ Specified rpm	Reverse: 0-3 MPH (0-4.83 km/h)
Continuous Torque	115 ft. lbs. (155 N.m.)
Output
Maximum Weight	340 lbs. (154 Kg) per Axle
on Axle

DIMENSIONS:

Overall Length	72” (182,9 cm)
Overall Width	55” (139,7 cm)
Height	38” (96,5 cm)
Weight (apx.)
Snapper	601 lbs. (273 kg)
Simplicity	617 lbs. (280 kg)

Model	ERZT185440BVE (Snapper) ERZT185440BVE (Simplicity)
RPM’s (Governed)	2550	2550
Kilowatts (kW) (@ Governed RPM’s)	13.8	13.8
Unit Mass (kg)	273	280
Sound Power (LWA) (dBA)	100	100
Sound Pressure (LPA) (dBA)	86	86
Vibration (Hand) (m/s2)	9.8	9.8
Vibration (Body) (m/s2)	0.7	0.7

33