Starting and Stopping, Check before starting

STARTING AND STOPPING

Check before starting

•Inspect the working area. Remove any objects that could be thrown out.

•Check the cutting attachment. Never use blades that are dull, cracked or damaged.

•Check that the machine is in perfect working order. Check that all nuts and screws are tight.

•Make sure the gear housing is lubricated correctly. See instructions under the heading Gear housing.

•Check that the cutting attachment always stops when the engine is idling.

•Only use the machine for the purpose it was intended for.

•Make sure that the handle and safety features are in good working order. Never use a machine that lacks a part or has been modiﬁed outside its speciﬁcations.

•All covers must be correctly ﬁtted and undamaged before you start the machine.

Starting and stopping

WARNING! The complete clutch cover and

!shaft must be ﬁtted before the machine is started, otherwise the clutch can come loose and cause personal injury.

Always move the machine about 3 metres from the refuelling position before starting. Place the machine on a ﬁrm surface. Remember that the blades may start to move when the engine is started. Make sure the blades cannot come into contact with any object. Make sure that no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury.

The safety distance is 15 metres.

Cold engine

Primer bulb: Press the air purge repeatedly until fuel begins to ﬁll the bulb. The bulb need not be completely ﬁlled.

Choke: Set the choke control in the choke position.

Start throttle: Set the throttle to the start position by ﬁrst pressing the throttle lockout and the throttle trigger, then pressing the start throttle button (A). Then release the throttle lockout and the throttle trigger, followed by the start throttle button. The throttle function is now activated. To return the engine to idle, press the throttle lockout and throttle trigger again.

Warm engine

Use the same starting procedure as for a cold engine but without setting the choke control in the choke position.

Starting

Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot!). Grip the starter handle, slowly pull out the cord with your right hand until you feel some resistance (the starter pawls grip), now quickly and powerfully pull the cord.

Push the choke control back to its original position as soon as the engine ﬁres, and continue trying to start until the engine starts.

CAUTION! Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended. This can damage the machine.

Stopping

The engine is switched off by moving the stop switch to the stop position.

English – 13

HTE2123 specifications

The Jonsered HTE2123 is a cutting-edge chainsaw that stands out in the market for its combination of power, efficiency, and user-friendly design. Targeted towards both professional users and DIY enthusiasts, this model embodies the rugged reliability and performance that Jonsered is known for, making it an excellent choice for a variety of forestry tasks.

One of the main features of the HTE2123 is its robust engine, which delivers a substantial power output. The chainsaw is equipped with a high-performance 21.4 cc two-stroke engine, providing ample torque and speed to tackle demanding jobs. This engine complies with rigorous emissions standards, making it an eco-friendlier option for users concerned about environmental impact.

A significant aspect of the HTE2123 is its advanced starting technology. The chainsaw is fitted with an ergonomic starting system that facilitates easy and reliable starting, reducing the frustration often associated with starting internal combustion engines. This feature is especially beneficial in cold conditions or after prolonged periods of non-use.

The chainsaw also boasts a lightweight design, weighing approximately 4.2 kg, which enhances maneuverability and reduces user fatigue during extended periods of operation. The well-designed handle provides a comfortable grip and allows for optimal control, ensuring precision during cuts.

In terms of safety, the HTE2123 is equipped with several important safety features. It features a chain brake that rapidly halts chain movement in the event of kickback, protecting the user from potential injury. Additionally, the chainsaw includes a protective cover for the chain, adding an extra layer of security when the saw is not in use.

Another characteristic of the Jonsered HTE2123 is its ease of maintenance. The chainsaw is designed with accessibility in mind, enabling quick and straightforward access to the air filter and spark plug. This simplicity ensures that regular maintenance can be performed with minimal downtime, keeping the tool in optimal working condition.

Overall, the Jonsered HTE2123 is a well-rounded chainsaw, merging power, efficiency, and user-centric features. Whether for pruning, felling, or general woodcutting tasks, this model delivers reliability and performance, making it a valuable asset for anyone looking to enhance their outdoor work experience. With its ease of use and superior engineering, it is well-suited for both novice and experienced operators alike.