Global Machinery Company LT550 Maintenance and cleaning, General inspection, Storage

Page 11

5. Press the auto feed spool

 

5

(10) and pull out the

lines until they reach the

 

outside edge of the guard.

 

6. Replace the spool cover

 

ensuring that it is fully

 

inserted.

 

CAUTION. After changing the line spool, run the trimmer under no load for

at least a minute to make sure that the line and the tool are both operating correctly. Use only the line spool as recommended by the manufacturer.

Maintenance and cleaning

1.Store the tool, instruction manual and accessories in a secure, dry place. In this way you will always have the information ready to hand.

2.Keep the tool’s air vents unclogged and clean at all times.

3.Remove dust and dirt regularly. Cleaning is best done with a rag.

4.All bearings and bushes are lubricated for life.

5.If the cordset is damaged or worn, it must be replaced by the manufacturer, or service agent or a similarly qualified person in order to avoid a hazard.

6.Never use caustic agents to clean plastic parts.

CAUTION. Do not use cleaning agents to clean the plastic parts of the tool. A mild detergent on a damp cloth is recommended. Water must never come into contact with the tool.

General inspection

Regularly check that all the fixing screws are tight. They may vibrate loose over time.

Storage

1.Store the trimmer away from direct sunlight.

2.Do not store in a nylon bag as this can encourage the formation of mould.

3.At the end of the season, give the trimmer an overall cleaning and a thorough check.

4.Do not leave the trimmer resting on the floor for extended periods as it could cause the shape of the guard to alter, posing a safety risk. Hang it off the floor by the top handgrip.

Power cord maintenance

If the supply cord needs replacing, the task must be carried out by the manufacturer, the manufacturer’s agent, or an authorised service centre in order to avoid a safety hazard.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 550W Line Trimmer Contents Introduction Description of symbolsSpecifications Dear CustomerSerious personal injury Safety instructionsPersonal safety Is maintained Additional safety rules for line trimmersPower tool use and care ServiceWear goggles Wear ear defenders Wear a breathing mask Contents of cartonUnpacking Know your product Extension cord support AssemblyAdjusting the telescopic handle Fitting the guard and guide wheelTrimming Switching on and offBefore starting Increasing the cutting lineTrimming Edgeing Using as an edgerChanging a line spool Storage Maintenance and cleaningPower cord maintenance General inspectionSave this Manual for future reference

LT550 specifications

Global Machinery Company has made significant strides in the machinery sector with the introduction of the LT550, a versatile and powerful machine designed to meet the demands of various industries. The LT550 combines advanced technology with innovative engineering, making it a leader in its class.

One of the standout features of the LT550 is its robust construction, ensuring durability and reliability in even the most challenging environments. The chassis is built from high-strength steel, providing a sturdy foundation that can withstand heavy loads and extensive use. This durability is complemented by a powerful engine that delivers exceptional performance, enabling the LT550 to tackle a wide range of tasks with ease.

The LT550 is equipped with cutting-edge hydraulic technology that enhances its operational efficiency. The advanced hydraulic system allows for precise control over lifting and maneuvering, making it ideal for tasks such as lifting heavy materials, moving equipment, or even material handling in warehouses. This technology not only improves productivity but also ensures safety and stability during operation.

Another notable characteristic of the LT550 is its user-friendly interface. The controls are intuitively designed, allowing operators to navigate the machine’s functions easily. An ergonomic cabin with adjustable seating and clear visibility enhances the operator's experience, reducing fatigue and increasing operational efficiency.

In terms of maintenance, the LT550 has been engineered for ease of access to components, simplifying routine checks and service. This design consideration helps to minimize downtime and keeps the machine operating at peak performance levels.

Moreover, the LT550 is committed to sustainability. It incorporates fuel-efficient technologies that reduce emissions and contribute to a greener environment. Operators can benefit from extended operating hours while using less fuel, ultimately lowering operational costs.

In summary, the Global Machinery Company LT550 stands out in the marketplace due to its robust build, advanced hydraulic technology, user-friendly controls, low maintenance requirements, and commitment to sustainability. Whether used in construction, warehousing, or industrial applications, the LT550 proves to be an invaluable asset for any operation, setting a new standard in the machinery field. With its innovative features and reliability, the LT550 is poised to redefine efficiency in heavy machinery.
Top Page Image Contents