Global Machinery Company LT550 Using as an edger, Changing a line spool, Trimming Edgeing

Page 10

3.

Cut the grass by swinging the trimmer from right to

 

left and proceed slowly keeping the trimmer inclined

 

forwards at an angle of about 30°. Light cuts are better

 

than heavy cuts as they allow the cut grass to fall away

 

from the spool preventing the grass from clogging the

 

spool.

4.

Start cutting nearest the mains power source and work

 

away from it to make it easier to avoid the extension

 

cord.

5.

High grass should be cut in layers always beginning

 

from the top. Do not cut damp or wet grass. Do not

 

overload your trimmer.

3.You can now use the line trimmer as an edger. The wheel is used to guide the line trimmer along the ground.

Trimming

Edgeing

6.

Avoid wearing the line out quickly by knocking against

 

hard objects (stones, walls, fences etc.).

7.

Watch out for kickbacks in the event of impact with

 

hard objects.

8.

After finishing the cutting operation, keep the head

 

close to ground level, release the switch and allow

 

the motor to come to a complete standstill. Place the

 

trimmer on the ground, switch off and remove the cable

 

plug from the mains supply.

Note. Periodically clean out the grass between the spool and the rim of the guard to prevent the tool

from vibrating.

Using as an edger

Note. Always unplug the trimmer before carrying out any maintenance or making any adjustments to the line trimmer.

1. Press the handle rotating

 

1

button (14) and rotate

 

the shaft 180 degrees, so

 

it is facing so the handle

 

is facing the opposite

 

direction.

 

2. Release the rotating

 

button (14), ensuring

 

that the handle clicks

 

into position.

 

Changing a line spool

Warning. Ensure the cutting line blade cover is replaced.

Note. Always unplug the trimmer before carrying out any maintenance or making any adjustments to the line trimmer.

1. Turn the line trimmer upside

 

2

down.

 

2. Hold the spool holder firmly

 

with one hand and with the

 

other hand squeeze the tabs

 

on either side of the spool

 

cover and remove the cover.

 

3. Remove the empty spool and

 

clean out the spool cover.

 

 

4. Align the cutaway sections in

4

the spool opposite the eyelets

 

and thread the two lines of

 

the or new spool through

 

the two eyelets in the spool

 

holder and insert the spool.

 

 

 

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 550W Line Trimmer Contents Dear Customer Description of symbolsSpecifications IntroductionPersonal safety Safety instructionsSerious personal injury Service Additional safety rules for line trimmersPower tool use and care Is maintainedUnpacking Contents of cartonWear goggles Wear ear defenders Wear a breathing mask Know your product Fitting the guard and guide wheel AssemblyAdjusting the telescopic handle Extension cord supportIncreasing the cutting line Switching on and offBefore starting TrimmingChanging a line spool Using as an edgerTrimming Edgeing General inspection Maintenance and cleaningPower cord maintenance StorageSave this Manual for future reference

LT550 specifications

Global Machinery Company has made significant strides in the machinery sector with the introduction of the LT550, a versatile and powerful machine designed to meet the demands of various industries. The LT550 combines advanced technology with innovative engineering, making it a leader in its class.

One of the standout features of the LT550 is its robust construction, ensuring durability and reliability in even the most challenging environments. The chassis is built from high-strength steel, providing a sturdy foundation that can withstand heavy loads and extensive use. This durability is complemented by a powerful engine that delivers exceptional performance, enabling the LT550 to tackle a wide range of tasks with ease.

The LT550 is equipped with cutting-edge hydraulic technology that enhances its operational efficiency. The advanced hydraulic system allows for precise control over lifting and maneuvering, making it ideal for tasks such as lifting heavy materials, moving equipment, or even material handling in warehouses. This technology not only improves productivity but also ensures safety and stability during operation.

Another notable characteristic of the LT550 is its user-friendly interface. The controls are intuitively designed, allowing operators to navigate the machine’s functions easily. An ergonomic cabin with adjustable seating and clear visibility enhances the operator's experience, reducing fatigue and increasing operational efficiency.

In terms of maintenance, the LT550 has been engineered for ease of access to components, simplifying routine checks and service. This design consideration helps to minimize downtime and keeps the machine operating at peak performance levels.

Moreover, the LT550 is committed to sustainability. It incorporates fuel-efficient technologies that reduce emissions and contribute to a greener environment. Operators can benefit from extended operating hours while using less fuel, ultimately lowering operational costs.

In summary, the Global Machinery Company LT550 stands out in the marketplace due to its robust build, advanced hydraulic technology, user-friendly controls, low maintenance requirements, and commitment to sustainability. Whether used in construction, warehousing, or industrial applications, the LT550 proves to be an invaluable asset for any operation, setting a new standard in the machinery field. With its innovative features and reliability, the LT550 is poised to redefine efficiency in heavy machinery.
Top Page Image Contents