Global Machinery Company LT550 Before starting, Increasing the cutting line, Switching on and off

Page 9

adjustment pedal (15) on the base of the line trimmer with your foot. Then move the handle downwards to the desired angle.

Before starting

Before use, check that the tool is in good working order and that the length of the trimmer line is correct, as follows:

1.Ensure the switch is in the off position and disconnect the cable plug from the mains supply.

2.Examine the general condition of the tool. Inspect the guard, switch, cordset and extension cord. Check for loose screws, misalignment, binding of moving parts, improper mounting, broken parts and any other condition that may affect its safe operation. If abnormal noise or vibration occurs during operation, turn the line trimmer off immediately and have the problem corrected.

3.Ensure that you are on a flat surface and have secure footing.

4.Check that the line touches or goes beyond the edge of the guard.

Increasing the cutting line

1. Before starting ensure the

 

1

cutting line is the correct

length. Pull the cutting

 

line to the edge of the

 

guard (8).

 

2.If the line is to short push down on the automatic feed spool (10) and at the same time pull the line out so that it extends

a few centimeters past the edge of the guard.

3. Remove the cover from the

3

line cutting blade (9).

4.During operation to increase the cutting line simply switch the line trimmer off and then on again, this with restore the line to the correct length.

Note. Only remove the cover from the cutting line blade

when all operational checks have been carried out. Replace the cover when the line trimmer is not in use.

Switching on and off

 

2

1. Connect the extension cord

 

to power.

 

2.Press the lock-off button (4), then press the trigger switch (3).

3.To switch off, release the trigger switch.

WARNING. The tool runs for

approximately 5 seconds after it has been switched off. Let the motor come to a complete standstill before setting the tool down.

Trimming

WARNING. Make sure that the work area is free of rocks, debris, lines and other foreign objects.

1.Start the trimmer before approaching the grass to be cut.

2.The automatic line feed mechanism releases 12mm from each line when the trimmer reaches a certain speed. If you need the spool to release more than 12mm of line per side, release the trigger until the speed falls beyond the trigger point then press the switch again. As the speed picks up a further 12mm will be released for both lines.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 550W Line Trimmer Contents Specifications Description of symbolsDear Customer IntroductionSafety instructions Personal safetySerious personal injury Power tool use and care Additional safety rules for line trimmersService Is maintainedContents of carton UnpackingWear goggles Wear ear defenders Wear a breathing mask Know your product Adjusting the telescopic handle AssemblyFitting the guard and guide wheel Extension cord supportBefore starting Switching on and offIncreasing the cutting line TrimmingUsing as an edger Changing a line spoolTrimming Edgeing Power cord maintenance Maintenance and cleaningGeneral inspection StorageSave this Manual for future reference

LT550 specifications

Global Machinery Company has made significant strides in the machinery sector with the introduction of the LT550, a versatile and powerful machine designed to meet the demands of various industries. The LT550 combines advanced technology with innovative engineering, making it a leader in its class.

One of the standout features of the LT550 is its robust construction, ensuring durability and reliability in even the most challenging environments. The chassis is built from high-strength steel, providing a sturdy foundation that can withstand heavy loads and extensive use. This durability is complemented by a powerful engine that delivers exceptional performance, enabling the LT550 to tackle a wide range of tasks with ease.

The LT550 is equipped with cutting-edge hydraulic technology that enhances its operational efficiency. The advanced hydraulic system allows for precise control over lifting and maneuvering, making it ideal for tasks such as lifting heavy materials, moving equipment, or even material handling in warehouses. This technology not only improves productivity but also ensures safety and stability during operation.

Another notable characteristic of the LT550 is its user-friendly interface. The controls are intuitively designed, allowing operators to navigate the machine’s functions easily. An ergonomic cabin with adjustable seating and clear visibility enhances the operator's experience, reducing fatigue and increasing operational efficiency.

In terms of maintenance, the LT550 has been engineered for ease of access to components, simplifying routine checks and service. This design consideration helps to minimize downtime and keeps the machine operating at peak performance levels.

Moreover, the LT550 is committed to sustainability. It incorporates fuel-efficient technologies that reduce emissions and contribute to a greener environment. Operators can benefit from extended operating hours while using less fuel, ultimately lowering operational costs.

In summary, the Global Machinery Company LT550 stands out in the marketplace due to its robust build, advanced hydraulic technology, user-friendly controls, low maintenance requirements, and commitment to sustainability. Whether used in construction, warehousing, or industrial applications, the LT550 proves to be an invaluable asset for any operation, setting a new standard in the machinery field. With its innovative features and reliability, the LT550 is poised to redefine efficiency in heavy machinery.
Top Page Image Contents