Power tool use and care, Service | Global Machinery Company LT550

Power tool use and care

•Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

•Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

•Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

•Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

•Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

•Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

•Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.

Service

•Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool

is maintained.	5

Additional safety rules for line trimmers

•Always wear adequate protective clothing when operating the machine to avoid injuries to face, eyes, hands, feet, head or hearing. Use safety glasses or a face shield, high boots or sturdy shoes, long trousers, work gloves, a hard hat and hearing protection.

•When starting up and when the machine is in operation, keep the cutting section away from all parts of the body, especially the hands and feet.

•Do not start the machine when it is upside down or when it is not in the operating position.

•Switch the motor off and pull out the plug when the machine is not being used, left unattended, being cleaned, being moved from one place to another or when the spool is being changed or the length of line manually adjusted.

•If there is an interruption to the power supply or the extension cable is damaged, switch off the machine immediately and remove the plug from the power point.

•Do not move the machine by pulling on the electrical cable. Always use the handgrip.

•Do not operate the machine near people, especially children or pets. Turn it off if they get too close. Maintain a safe distance of at least 5m from other people when using the machine.

•Keep a balanced and stable stance while using the machine.

•Ensure that the area being cut is free from strings, stones and debris.

•Do not cut against hard objects. This could cause injury to the operator and damage to the machine.

•Never use the machine without the guard. Never use the machine if the guard is damaged.

LT550 specifications

Global Machinery Company has made significant strides in the machinery sector with the introduction of the LT550, a versatile and powerful machine designed to meet the demands of various industries. The LT550 combines advanced technology with innovative engineering, making it a leader in its class.

One of the standout features of the LT550 is its robust construction, ensuring durability and reliability in even the most challenging environments. The chassis is built from high-strength steel, providing a sturdy foundation that can withstand heavy loads and extensive use. This durability is complemented by a powerful engine that delivers exceptional performance, enabling the LT550 to tackle a wide range of tasks with ease.

The LT550 is equipped with cutting-edge hydraulic technology that enhances its operational efficiency. The advanced hydraulic system allows for precise control over lifting and maneuvering, making it ideal for tasks such as lifting heavy materials, moving equipment, or even material handling in warehouses. This technology not only improves productivity but also ensures safety and stability during operation.

Another notable characteristic of the LT550 is its user-friendly interface. The controls are intuitively designed, allowing operators to navigate the machine’s functions easily. An ergonomic cabin with adjustable seating and clear visibility enhances the operator's experience, reducing fatigue and increasing operational efficiency.

In terms of maintenance, the LT550 has been engineered for ease of access to components, simplifying routine checks and service. This design consideration helps to minimize downtime and keeps the machine operating at peak performance levels.

Moreover, the LT550 is committed to sustainability. It incorporates fuel-efficient technologies that reduce emissions and contribute to a greener environment. Operators can benefit from extended operating hours while using less fuel, ultimately lowering operational costs.

In summary, the Global Machinery Company LT550 stands out in the marketplace due to its robust build, advanced hydraulic technology, user-friendly controls, low maintenance requirements, and commitment to sustainability. Whether used in construction, warehousing, or industrial applications, the LT550 proves to be an invaluable asset for any operation, setting a new standard in the machinery field. With its innovative features and reliability, the LT550 is poised to redefine efficiency in heavy machinery.