Fujitsu MB95F430 manual #pragma intvect DefaultIRQHandler

Operational Amplifier Version 1.0

Chapter 9 Sample Code

#pragma intvect DefaultIRQHandler 6	//	IRQ6:	8/16-bit timer ch0 (upper)
#pragma intvect DefaultIRQHandler 7	//	IRQ7:	Output Compare ch0
#pragma intvect DefaultIRQHandler 8	//	IRQ8:	Output Compare ch1
#pragma intvect DefaultIRQHandler 9	//	IRQ9:	none
#pragma intvect DefaultIRQHandler 10	// IRQ10: Voltage Compare ch0
#pragma intvect DefaultIRQHandler 11	// IRQ11: Voltage Compare ch1
#pragma intvect DefaultIRQHandler 12	// IRQ12: Voltage Compare ch2
#pragma intvect DefaultIRQHandler 13	// IRQ13: Voltage Compare ch3
#pragma intvect DefaultIRQHandler 14	// IRQ14: 16-bit free run timer
#pragma intvect DefaultIRQHandler 15	//	IRQ15: 16-bit PPG0
#pragma intvect DefaultIRQHandler 16	//	IRQ16: I2C ch0
#pragma intvect DefaultIRQHandler 17	//	IRQ17: none
#pragma intvect DefaultIRQHandler 18	//	IRQ18: 10-bit A/D-converter
#pragma intvect DefaultIRQHandler 19	//	IRQ19: Timebase timer
#pragma intvect DefaultIRQHandler 20	//	IRQ20: Watch timer
#pragma intvect DefaultIRQHandler 21	//	IRQ21: none
#pragma intvect DefaultIRQHandler 22	//	IRQ22: none
#pragma intvect DefaultIRQHandler 23	//	IRQ23: Flash Memory

/*---------------------------------------------------------------------------

DefaultIRQHandler()

This function is a placeholder for all vector definitions.

Either use your own placeholder or add necessary code here

(the real used resource interrupt handlers should be defined in the main.c).

-----------------------------------------------------------------------------*/

__interrupt void DefaultIRQHandler(void)

{
__DI();	// disable interrupts
while(1)
__wait_nop();	// halt system
}

MCU-AN-500080-E-10 - Page 18