Operational Amplifier Version 1.0
Chapter 2 Amplifier Overview
2.1Block Diagram of Operational Amplifier
Figure 1 Block Diagram of Operational Amplifier
2.2Pins of Operational Amplifier
The OPAMP uses the OPAMP_P pin and the OPAMP_N pin as the analog input pins of the operational amplifier, and uses the OPAMP_O pin as the analog output pin of the operational amplifier.
When GS [5] is set to "1B" and GS [4:0] is set to "00000B", the OPAMP will work as a standalone open loop operational amplifier.
When GS [5] is set to "0B", the OPAMP will work as a