ILRx | Fujitsu MB95F430 specification

			Operational Amplifier Version 1.0
			Chapter 9 Sample Code
/* ILRx		IRQs defined by ILRx */
ILR0 = 0xFF;	//	IRQ0:	external interrupt ch0 ch4
	//	IRQ1:	external interrupt ch1 ch5
	//	IRQ2:	external interrupt ch2 ch6
	//	IRQ3:	external interrupt ch3 ch7
ILR1 = 0xFF;	//	IRQ4:	UART/SIO ch0
	//	IRQ5:	8/16-bit timer ch0 (lower)
	//	IRQ6:	8/16-bit timer ch0 (upper)
	//	IRQ7:	Output Compare ch0
ILR2 = 0xFF;	//	IRQ8:	Output Compare ch1
	//	IRQ9:	none
	// IRQ10: Voltage Compare ch0
	// IRQ11: Voltage Compare ch1
ILR3 = 0xFF;	//	IRQ12: Voltage Compare ch2
	// IRQ13: Voltage Compare ch3
	// IRQ14: 16-bit free run timer
	//	IRQ15: 16-bit PPG0
ILR4 = 0xFF;	//	IRQ16: I2C ch0
	//	IRQ17: none
	//	IRQ18: 10-bit A/D-converter
	//	IRQ19: Timebase timer
ILR5 = 0xFF;	//	IRQ20: Watch timer
	//	IRQ21: none
	//	IRQ22: none
}	//	IRQ23: Flash Memory
}

/*---------------------------------------------------------------------------

Prototypes

Add your own prototypes here. Each vector definition needs is proto- type. Either do it here or include a header file containing them.

-----------------------------------------------------------------------------*/

__interrupt void DefaultIRQHandler(void);

/*---------------------------------------------------------------------------

Vector definiton

Use following statements to define vectors.

All resource related vectors are predefined.

Remaining software interrupts can be added hereas well.

-----------------------------------------------------------------------------			*/
#pragma intvect DefaultIRQHandler 0	//	IRQ0:	external interrupt ch0 ch4
#pragma intvect DefaultIRQHandler 1	//	IRQ1:	external interrupt ch1 ch5
#pragma intvect DefaultIRQHandler 2	//	IRQ2:	external interrupt ch2 ch6
#pragma intvect DefaultIRQHandler 3	//	IRQ3:	external interrupt ch3 ch7
#pragma intvect DefaultIRQHandler 4	//	IRQ4:	UART/SIO ch0
#pragma intvect DefaultIRQHandler 5	//	IRQ5:	8/16-bit timer ch0 (lower)

MCU-AN-500080-E-10- Page 17

/* ILRx