Check for Loose Fasteners and Parts | Poulan 530163516 specification

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screw S Debris Shield

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

SON/OFF Switch -- Ensure ON/OFF switch functions properly by moving the switch to the OFF position. Make sure engine stops;

then restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

S Debris Shield -- Discontinue use of unit if debris shield is damaged.

1. Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2. Remove parts by pressing button to re- lease air filter cover.

NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Add a few drops of oil to the filter; squeeze the filter to distribute oil.

6.Replace parts.

Button AirFilter

Air Filter

Cover

INSPECT AND CLEAN UNIT AND LA- BELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed and nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and discard.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch socket wrench.

4.Reinstall the spark plug boot.

REPLACING THE LINE

1.Remove spool by firmly pulling on tap button.

2.Clean entire surface of hub and spool.

3.Replace with a pre-wound spool, or cut two lengths of 12-1/2feet of 0.080! (2 mm) di- ameter Poulan/Weed Eaterr brand line.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

4.Insert ends of the lines about 1/2 inch (1 cm) into the small holes on the inside of spool.

Spool

Small

Holes

Line exit holes				Line in Notch

Line in Notch

Hub

5.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrows found on the spool.

6.Push the lines into the notches, leaving 3 to 5 inches (7 -- 12 cm) unwound.

7.Insert the lines into the the exit holes in the hub as shown in the illustration.

8.Align the notches with the line exit holes.

9.Push spool into hub until it snaps into place.

10.Pull the lines extending outside of the hub to release the lines from the notches.

530163516 specifications

The Poulan 530163516 is a high-performance trimmer head that enhances the functionality of various compatible string trimmers, making it a popular choice among landscaping professionals and gardening enthusiasts. Its design and technology cater to the demands of heavy-duty trimming, offering durability and ease of use.

One of the standout features of the Poulan 530163516 is its innovative bump feed system. This mechanism allows users to effortlessly release more line with a simple bump on the ground. This eliminates the need for frequent stops to manually feed the line, thereby increasing efficiency during trimming tasks. The bump feed system is designed to work seamlessly, ensuring that the line is dispensed consistently for optimal performance.

The trimmer head is equipped with a robust construction that ensures it withstands the rigors of outdoor use. Made from high-quality materials, it is resistant to wear and tear, making it a reliable tool for long-lasting service. The steel components in the head provide added strength, allowing it to handle heavy usage without compromising on performance.

Another significant characteristic of the Poulan 530163516 is its compatibility with a wide range of trimmer models. This versatility makes it a highly sought-after accessory for users who may already own various brands of trimmers. The universal fit allows for easy installation without the need for specialized tools, making it convenient for users to upgrade their equipment quickly.

The design of the trimmer head also prioritizes ease of line loading. It features a quick-load system that simplifies the process of replacing the line, significantly reducing downtime. Users can either use pre-cut lengths or easily cut their desired lengths of line, enhancing the convenience of operation.

In terms of performance, the Poulan 530163516 is engineered to deliver consistent cutting power, allowing users to tackle tough grasses and weeds without straining their equipment. The head's efficiency translates into a cleaner, more precise cut, which is crucial for maintaining landscaped areas and gardens.

In summary, the Poulan 530163516 trimmer head combines advanced technologies with user-friendly features. Its durability, compatibility, and efficient design make it a top choice for anyone looking to enhance their trimming capabilities. Whether you're a professional landscaper or a home gardener, this trimmer head provides the reliability and performance needed for effective outdoor maintenance.