Poulan 530163516 Installing Trimmer ATTACH- Ment, Attaching Shield, Adjusting the Handle

Page 7

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723.

It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

INSTALLING TRIMMER ATTACH- MENT

CAUTION: When installing trimmer attach- ment, place the unit on a flat surface for stabil- ity.

1.Loosen the coupler by turning the knob counterclockwise.

Coupler

LOOSEN

WARNING: Make sure the locking/ release button is locked in the primary hole and the knob is securely tightened before op- erating the unit. All attachments are designed to be used in the primary hole.

For optional attachments, see the AS- SEMBLY section of the applicable attach- ment instruction manual.

ATTACHING SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protec- tion from the risk of thrown objects to the opera- tor and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you. For proper orientation of shield, see KNOW YOUR TRIM- MER illustration in OPERATION section.

1.

Remove wing nut from shield.

2.

Insert bracket into slot as shown.

3.

Pivot shield until bolt passes through hole

 

in bracket.

4.

Securely tighten wing nut onto bolt.

Shipping protector

TIGHTEN

Knob

Slot Bracket

 

Wing Nut

Shield

 

 

 

Gearbox

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.Remove shipping protector from coupler.

3.Remove the tube cap from the trimmer at- tachment (if present).

4.Position locking/release button of attach- ment into guide recess of coupler.

5.Push the attachment into the coupler until the locking/release button snaps into the primary hole.

6.Before using the unit, tighten the knob se- curely by turning clockwise.

ADJUSTING THE HANDLE

WARNING: When adjusting the han- dle, be sure it remains between the trigger and the arrow on the safety label.

1.Loosen wing nut on handle.

2.Rotate the handle on the tube to an up- right position; retighten wing nut.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Manual de Instrucciones Manuel d’Instructions PP4000C Operator SafetyTransporting and Storage Unit / Maintenance SafetyFuel Safety Line Trimmer SafetyBLOWER/VACUUM Safety Edger SafetyBrushcutter Safety Hedge Trimmer Safety Pole Pruner Safety Cultivator SafetyOr broken Snow Thrower SafetyAdjusting the Handle Installing Trimmer ATTACH- MentAttaching Shield Primer Bulb ON/OFF Switch ChokeHOW to Stop Your Unit Know Your TrimmerStarting a Warm Engine HOW to Start Your UnitStarting a Flooded Engine Trimmer Line Advance Installing Optional ATTACH- MentsOperating the Coupler Operating PositionRightWrong Cutting MethodsCheck for Damaged or Worn Parts Inspect and Clean Unit and LA- BelsClean AIR Filter Check for Loose Fasteners and PartsFuel System Carburetor AdjustmentReplacing the Cutting Head Seasonal StorageTroubleshooting Table Cause Remedy Agency and POULAN/WEED EATER, Divi

530163516 specifications

The Poulan 530163516 is a high-performance trimmer head that enhances the functionality of various compatible string trimmers, making it a popular choice among landscaping professionals and gardening enthusiasts. Its design and technology cater to the demands of heavy-duty trimming, offering durability and ease of use.

One of the standout features of the Poulan 530163516 is its innovative bump feed system. This mechanism allows users to effortlessly release more line with a simple bump on the ground. This eliminates the need for frequent stops to manually feed the line, thereby increasing efficiency during trimming tasks. The bump feed system is designed to work seamlessly, ensuring that the line is dispensed consistently for optimal performance.

The trimmer head is equipped with a robust construction that ensures it withstands the rigors of outdoor use. Made from high-quality materials, it is resistant to wear and tear, making it a reliable tool for long-lasting service. The steel components in the head provide added strength, allowing it to handle heavy usage without compromising on performance.

Another significant characteristic of the Poulan 530163516 is its compatibility with a wide range of trimmer models. This versatility makes it a highly sought-after accessory for users who may already own various brands of trimmers. The universal fit allows for easy installation without the need for specialized tools, making it convenient for users to upgrade their equipment quickly.

The design of the trimmer head also prioritizes ease of line loading. It features a quick-load system that simplifies the process of replacing the line, significantly reducing downtime. Users can either use pre-cut lengths or easily cut their desired lengths of line, enhancing the convenience of operation.

In terms of performance, the Poulan 530163516 is engineered to deliver consistent cutting power, allowing users to tackle tough grasses and weeds without straining their equipment. The head's efficiency translates into a cleaner, more precise cut, which is crucial for maintaining landscaped areas and gardens.

In summary, the Poulan 530163516 trimmer head combines advanced technologies with user-friendly features. Its durability, compatibility, and efficient design make it a top choice for anyone looking to enhance their trimming capabilities. Whether you're a professional landscaper or a home gardener, this trimmer head provides the reliability and performance needed for effective outdoor maintenance.
Top Page Image Contents