Poulan 530163516 HOW to Start Your Unit, Starting a Warm Engine, Starting a Flooded Engine

Page 9

ON/OFF Switch

HOW TO START YOUR UNIT

WARNING: The trimmer head will turn while starting the engine.

Avoid any contact with the muffler. A hot muf- fler can cause serious burns.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Starting Position

Starter Handle

Choke

Lever

Primer Bulb

Muffler

1.Set unit on a flat surface.

2.Move ON/OFF switch to the ON position.

3.Slowly press the primer bulb 6 times.

4.Move choke lever to FULL CHOKE by aligning lever with position shown on de- cal (see illustration below).

Choke position decal

5.Squeeze the throttle trigger fully and hold through all remaining steps.

6.Pull starter rope handle sharply until en- gine sounds as if it is trying to start, but do not pull rope more than 6 times.

7.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE by aligning lever with position shown on decal (see following illustra- tion).

Choke position decal

8.Pull starter rope sharply until engine runs, but no more than 6 pulls. If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the starter rope until the engine runs, but no more than 6 pulls. If the engine doesn’t start, repeat procedure 2 additional times.

NOTE: If engine still doesn’t start, it is probably flooded. Proceed to STARTING A FLOODED ENGINE.

9.Once the engine starts, allow it to run 10 seconds, then move the choke lever to OFF CHOKE by aligning lever with posi- tion shown on decal (see illustration be- low). Allow the unit to run for 30 more se- conds at OFF CHOKE before releasing the throttle trigger. NOTE: If engine dies with the choke lever in the OFF CHOKE position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

Choke position decal

STARTING A WARM ENGINE

1.Move ON/OFF switch to the ON position.

2.Move the choke lever to the HALF CHOKE position.

3.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the engine runs smoothly.

4.Pull starter rope sharply until engine runs, but no more than 5 pulls.

5.Allow engine to run 15 seconds, then move the choke lever to the OFF CHOKE position.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the OFF CHOKE position; then, pull the rope to clear the engine of ex- cess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Manual de Instrucciones Manuel d’Instructions PP4000C Operator SafetyFuel Safety Unit / Maintenance SafetyLine Trimmer Safety Transporting and StorageEdger Safety BLOWER/VACUUM SafetyBrushcutter Safety Hedge Trimmer Safety Pole Pruner Safety Cultivator SafetyOr broken Snow Thrower SafetyInstalling Trimmer ATTACH- Ment Adjusting the HandleAttaching Shield HOW to Stop Your Unit ON/OFF Switch ChokeKnow Your Trimmer Primer BulbHOW to Start Your Unit Starting a Warm EngineStarting a Flooded Engine Operating the Coupler Installing Optional ATTACH- MentsOperating Position Trimmer Line AdvanceRightWrong Cutting MethodsClean AIR Filter Inspect and Clean Unit and LA- BelsCheck for Loose Fasteners and Parts Check for Damaged or Worn PartsReplacing the Cutting Head Carburetor AdjustmentSeasonal Storage Fuel SystemTroubleshooting Table Cause Remedy Agency and POULAN/WEED EATER, Divi

530163516 specifications

The Poulan 530163516 is a high-performance trimmer head that enhances the functionality of various compatible string trimmers, making it a popular choice among landscaping professionals and gardening enthusiasts. Its design and technology cater to the demands of heavy-duty trimming, offering durability and ease of use.

One of the standout features of the Poulan 530163516 is its innovative bump feed system. This mechanism allows users to effortlessly release more line with a simple bump on the ground. This eliminates the need for frequent stops to manually feed the line, thereby increasing efficiency during trimming tasks. The bump feed system is designed to work seamlessly, ensuring that the line is dispensed consistently for optimal performance.

The trimmer head is equipped with a robust construction that ensures it withstands the rigors of outdoor use. Made from high-quality materials, it is resistant to wear and tear, making it a reliable tool for long-lasting service. The steel components in the head provide added strength, allowing it to handle heavy usage without compromising on performance.

Another significant characteristic of the Poulan 530163516 is its compatibility with a wide range of trimmer models. This versatility makes it a highly sought-after accessory for users who may already own various brands of trimmers. The universal fit allows for easy installation without the need for specialized tools, making it convenient for users to upgrade their equipment quickly.

The design of the trimmer head also prioritizes ease of line loading. It features a quick-load system that simplifies the process of replacing the line, significantly reducing downtime. Users can either use pre-cut lengths or easily cut their desired lengths of line, enhancing the convenience of operation.

In terms of performance, the Poulan 530163516 is engineered to deliver consistent cutting power, allowing users to tackle tough grasses and weeds without straining their equipment. The head's efficiency translates into a cleaner, more precise cut, which is crucial for maintaining landscaped areas and gardens.

In summary, the Poulan 530163516 trimmer head combines advanced technologies with user-friendly features. Its durability, compatibility, and efficient design make it a top choice for anyone looking to enhance their trimming capabilities. Whether you're a professional landscaper or a home gardener, this trimmer head provides the reliability and performance needed for effective outdoor maintenance.
Top Page Image Contents