Poulan 461ZX, 966681801 warranty Weak Battery, To remove cables, reverse order

Page 28

OPERATION

Weak Battery

If your battery is too weak to start the engine, it should be recharged. (See Battery in the Maintenance section.)

WARNING!

Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

Jumper Cable Use

IMPORTANT INFORMATION

Your mower is equipped with a 12-volt negative grounded system. The other vehicle must also be a 12-volt negative grounded system. Do not use your mower to start other vehicles.

1.Connect each end of the RED cable to the POSITIVE (+) terminal on each battery, taking care not to short against chassis.

2.

Connect one end of the BLACK cable to the

8011-642

 

NEGATIVE (-) terminal of the fully charged battery.

 

Jumper cable connection

3.

Connect the other end of the BLACK cable to a

 

 

good CHASSIS GROUND on the mower with the

 

 

discharged battery, away from the fuel tank and

 

 

battery.

 

To remove cables, reverse order

4.Remove BLACK cable first from chassis and then from the fully charged battery.

5.Remove RED cable last from both batteries.

28

Image 28
Contents Operator Manual Page Table of Contents Page Introduction Good Service Manufacturing NumberSymbols and Decals Xxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxxRemove key before Performing any Safety Safety InstructionsNever take passengers Personal Safety Equipment Slope OperationBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Risk of sparking Transport Spark ArrestorControls Control LocationsMotion Control Levers Parking Brake Blade SwitchThrottle Control Choke Control Ignition SwitchHour Meter Fuel Tank Cutting Height Adjuster FusesFuel Shut Off Valve Always use the high position to transportBypass Linkages Seat Adjustment LeverSee Moving Machine By Hand in the Operation section Training OperationSteering Before Starting Starting the EngineMove the throttle to the middle position Press in and turn the ignition key to the start position Weak Battery To remove cables, reverse orderRunning Operating On Hills Mowing Tips Stopping the Engine Moving Machine By Hand Maintenance Maintenance ScheduleBefore After Year 100 Battery Replacing batterySafety System Anti-scalp Rollers Removal and installation of caster wheelCaster Wheels Deck Belt Installation Deck BeltDeck Belt Removal Matches the decal affixed to the deck,Blade replacement Cutting BladesAdjusting the Mower Deck Deck LevelingCleaning Use protective glasses when cleaning and washingTire Pressures HardwareLubrication Schedule LubricationGeneral Wheel and Deck Zerks Deck SpindlesFront Wheel Mount Front Wheel BearingsProblem Cause Trouble ShootingMaintenance Section Trouble Shooting Storage ServiceWinter Storage Schematic Technical Data Torque SpecificationsHex Head Cap Screws Standard Hardware461ZX 541ZX Engine Transmission461ZX 541ZX Equipment Overall dimensionsProductivity Conformity Certificates USA requirementsDelivery Service Service JournalAction Date, mtr reading Stamp, sign Daily Service After 10 hoursAction Date, mtr reading Stamp, signHour Service Service Journal At least once each year Action Date, mtr reading Stamp, sign
Related manuals
Manual 32 pages 34.7 Kb