Poulan 461ZX, 966681801 warranty Battery, Replacing battery

Page 36

MAINTENANCE

Battery

Your mower is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life.

•Keep battery and terminals clean.

•Keep battery bolts tight.

•See chart for charging times.

STANDARD

STATE

APPROXIMATE BATTERY CHARGING TIME*

 

 

TO FULL CHARGE AT 80OF / 27OC

BATTERY

OF

 

 

 

 

 

Maximum Rate at:

 

 

 

 

 

 

CHARGE

 

 

 

 

 

50 Amps

30 Amps

20 Amps

10 Amps

 

 

 

 

 

 

 

 

12.6V

100%

- FULL CHARGE -

 

 

 

 

 

 

 

12.4V

75%

20 min.

35 min.

48 min.

90 min.

 

 

 

 

 

 

12.2V

50%

45 min.

75 min.

95 min.

180 min.

 

 

 

 

 

 

12.0V

25%

65 min.

115 min.

145 min.

280 min.

 

 

 

 

 

 

11.8V

0%

85 min.

150 min.

195 min.

370 min.

 

 

 

 

 

 

*Charging time depends on battery capacity,

condition, age, temperature and efficiency of charger

CAUTION!

Always wear eye protection when around batteries.

Cleaning battery and terminals

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

1.Lift seat and rotate forward.

2.Disconnect BLACK battery cable first, then the RED battery cable and remove the battery from the machine.

3.Rinse the battery with plain water and dry.

4.Clean terminals and battery cable ends with wire brush until shiny.

5.Coat terminals with grease or petroleum jelly

6.Reinstall battery.

Replacing battery

1.Lift seat and rotate forward.

2.Using two ½" wrenches disconnect BLACK battery cable then RED battery cable.

3.Position deck to lowest setting.

4.From underside of frame, remove the nuts that secure the battery hold-down.

5.Carefully remove the battery from the mower.

6.Install new battery with terminals in the same position as the old battery.

7.Reinstall battery hold-down and secure with nuts removed in Step 5.

8.First connect RED battery cable to positive (+) battery terminal with hex bolt and hex nut.

9.Connect BLACK grounding cable to negative (-) battery terminal with remaining bolt and nut

10.Tighten securely.

11.Lower seat

IMPORTANT INFORMATION

Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

Always use two wrenches for the terminal screws.

WARNING!

Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparks from accidental grounding.

8050-109

Remove battery hold-down to replace battery

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Operator Manual Page Table of Contents Page Introduction Good Service Manufacturing NumberSymbols and Decals Xxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxxRemove key before Performing any Safety Safety InstructionsNever take passengers Personal Safety Equipment Slope OperationBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Risk of sparking Transport Spark ArrestorControls Control LocationsMotion Control Levers Blade Switch Parking BrakeThrottle Control Ignition Switch Choke ControlHour Meter Fuel Tank Cutting Height Adjuster FusesFuel Shut Off Valve Always use the high position to transportSeat Adjustment Lever Bypass LinkagesSee Moving Machine By Hand in the Operation section Operation TrainingSteering Before Starting Starting the EngineMove the throttle to the middle position Press in and turn the ignition key to the start position Weak Battery To remove cables, reverse orderRunning Operating On Hills Mowing Tips Stopping the Engine Moving Machine By Hand Maintenance Maintenance ScheduleBefore After Year 100 Battery Replacing batterySafety System Removal and installation of caster wheel Anti-scalp RollersCaster Wheels Deck Belt Installation Deck BeltDeck Belt Removal Matches the decal affixed to the deck,Blade replacement Cutting BladesAdjusting the Mower Deck Deck LevelingCleaning Use protective glasses when cleaning and washingTire Pressures HardwareLubrication Lubrication ScheduleGeneral Wheel and Deck Zerks Deck SpindlesFront Wheel Mount Front Wheel BearingsTrouble Shooting Problem CauseMaintenance Section Trouble Shooting Service StorageWinter Storage Schematic Technical Data Torque SpecificationsHex Head Cap Screws Standard Hardware461ZX 541ZX Engine TransmissionOverall dimensions 461ZX 541ZX EquipmentProductivity Conformity Certificates USA requirementsService Journal Delivery ServiceAction Date, mtr reading Stamp, sign Daily Service After 10 hoursAction Date, mtr reading Stamp, signHour Service Service Journal At least once each year Action Date, mtr reading Stamp, sign
Related manuals
Manual 32 pages 34.7 Kb

966681801, 461ZX specifications

The Poulan 461ZX, model number 966681801, is a potent chainsaw designed for both professional and residential users seeking a robust tool for various cutting tasks. This chainsaw is characterized by its powerful performance and user-friendly features, making it a versatile choice for anyone in need of a reliable cutting tool.

One of the main features of the Poulan 461ZX is its efficient engine. Powered by a reliable 46cc two-cycle engine, it delivers impressive power and torque, ideal for tackling a variety of cutting jobs, from felling trees to trimming branches. The engine is designed with advanced technology that ensures optimal fuel efficiency, allowing users to work longer on a single tank while reducing emissions and environmental impact.

The Poulan 461ZX also integrates an innovative air filtration system that prolongs the life of the engine. This system ensures that the air entering the engine is clean, preventing dust and debris from causing wear or damage to internal components. Additionally, the chainsaw is equipped with an easy-access fuel and oil tank, making refueling quick and hassle-free.

Another notable characteristic of the 461ZX is its ergonomic design. The chainsaw features a lightweight construction, which reduces user fatigue and provides better maneuverability during operation. The padded handles are designed for comfort, allowing for extended use without discomfort.

Safety is a priority with the Poulan 461ZX, which is equipped with an anti-vibration system. This technology minimizes vibration during operation, providing a steadier grip and enhancing user control. Furthermore, it includes a chain brake that automatically engages in the event of kickback, ensuring user safety.

The chainsaw comes standard with a chain and bar setup that provides optimal cutting performance. The 20-inch bar is ideal for handling larger logs and branches, while the chain is designed for fast and efficient cutting, reducing the amount of effort required during operation.

In summary, the Poulan 461ZX, model number 966681801, combines power, efficiency, and user-centric design to deliver an exemplary chainsaw. Its advanced engine technology, maintenance-friendly features, ergonomic design, and safety mechanisms make it a compelling choice for anyone in need of a reliable and effective cutting tool for various tasks in both commercial and home settings.
Top Page Image Contents