Poulan 115275026, 952711963 Edger Blade Replacement, Replacing the Trimmer Head, Screwdriver

Page 17

10.Insert the ends of the lines through exit holes in the sides of the cover.

Line exit hole

Cover

11.Reinstall the spool and cover onto the trimmer head. Push until cover snaps into place.

Dust Cup

2.Remove trimmer head by turning coun- terclockwise (looking from bottom of unit).

3.Thread replacement trimmer head onto the shaft by turning clockwise. Only tighten hand tight!

EDGER BLADE REPLACEMENT

WARNING: The blade will continue to spin after the engine stops or after the throttle trigger has been released. To avoid serious injury, make sure the blade has stopped coasting and disconnect the spark plug before performing work on the blade.

WARNING: Wear protective gloves when handling or performing maintenance on the blade to avoid injury. The blade is sharp and can cut you even when it is not moving.

1.To remove the blade, align hole in the dust cup with the hole in the side of the gear- box by rotating the blade.

2.Insert a small screwdriver into aligned holes. This will keep the shaft from turn- ing while loosening the blade nut.

Screwdriver

REPLACING THE TRIMMER HEAD

1.Hold the dust cup with a wrench to keep the shaft from turning while removing and installing trimmer head.

3.While holding the screwdriver in position, remove blade nut by turning clockwise.

4.Remove both washers, and the blade from the blade shaft.

Blade shield

Blade

 

Washers

Blade Shaft

Blade nut

 

5.Install new blade onto blade shaft.

6.Reinstall both washers and blade nut (counterclockwise).

7.Tighten blade nut firmly with a wrench while holding screwdriver in position.

8.Remove the screwdriver.

9.Turn blade by hand. If the blade binds against the shield, or appears to be un- even, the blade is not centered, and you must reinstall.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Avertissement AdvertenciaIdentification of Safety Symbols Table of ContentsIdentification of Safety Symbols Optional Attachments Safety RulesOperator Safety Rope, string, flailing devices, etc Line Trimmer SafetyEdger Safety Fuel Safety Additional Safety RulesBLOWER/VACUUM Safety Transporting and StorageHedge Trimmer Safety Brushcutter SafetyCultivator Safety Snow Thrower Safety Pole Pruner SafetyAnother Or brokenAdjusting the Assist Handle AssemblyInstalling Trimmer or Edger Attachments Operation HOW to Start Your Unit Trimmer Head Depth Adjustment KnobHOW to Stop Your Unit BladeOperating Instructions Installing Optional ATTACH- MentsStarting a Warm Engine Starting a Flooded EngineOperating Position Line Trimmer AttachmentTrimmer Line Advance Cutting MethodsEdger Attachment Setting the Edging DepthEdging MowingMaintenance Replacing the Line Service and AdjustmentsScrewdriver Edger Blade ReplacementReplacing the Trimmer Head Seasonal Storage Carburetor Idle Speed AdjustmentFuel System EngineTroubleshooting Table Cause Remedy Statesville Road Limited WarrantyCanada, contact Poulan PROPlacement and Repair of Emission

115275026, 952711963 specifications

The Poulan 115275026 and 952711963 are two high-quality replacement parts designed for Poulan chainsaws, known for their reliability and efficient functionality. These components play a crucial role in maintaining the performance of your chainsaw, ensuring that it operates smoothly and effectively during your cutting tasks.

One of the standout features of these replacement parts is their exceptional durability. Made from high-grade materials, they are built to withstand the rigors of heavy use. This durability not only extends the overall lifespan of the chainsaw but also enhances its performance by ensuring consistent power delivery and efficiency. Users can expect these parts to perform well even under challenging conditions, making them ideal for both professional and DIY applications.

In terms of technology, the Poulan 115275026 and 952711963 boast advanced engineering design that helps improve the chainsaw's fuel efficiency. This innovative approach minimizes fuel consumption while maximizing cutting performance, ultimately saving users money on both fuel and maintenance costs in the long run. Additionally, these parts are designed to minimize vibration, providing a smoother operation experience. This not only enhances user comfort but also improves precision during cutting tasks.

Another remarkable characteristic of these replacement parts is their easy installation. Poulan has designed these components to fit seamlessly into a variety of chainsaw models, allowing for quick and hassle-free replacement. This user-friendly design means that even those with limited mechanical skills can easily replace worn-out parts, ensuring their chainsaw is always in top condition.

Furthermore, the Poulan 115275026 and 952711963 are backed by a reputable brand known for its commitment to quality and customer satisfaction. This ensures that users receive a product they can trust, complete with the necessary support and guidance if needed.

In summary, the Poulan 115275026 and 952711963 replacement parts embody the quality and innovation that Poulan is known for in the chainsaw industry. Their durability, advanced technology, ease of installation, and strong brand reputation make them an excellent choice for anyone looking to maintain or upgrade their Poulan chainsaw. Investing in these replacement parts ensures optimal performance and longevity, making them a wise choice for all chainsaw users.
Top Page Image Contents