Poulan 115275026 Trimmer Head Depth Adjustment Knob, Blade, Before Starting Engine Fueling Engine

Page 11

TRIMMER HEAD

DEPTH ADJUSTMENT KNOB

The TRIMMER HEAD holds the cutting line

The DEPTH ADJUSTMENT KNOB is used

and rotates during operation. It is designed to

to adjust the wheel for blade cutting depth

cut grass.

when edging.

BLADE

 

 

The BLADE is designed to cut sod.

 

 

 

 

 

BEFORE STARTING ENGINE

 

 

WARNING: Be sure to read the fuel information in the safety rules before you begin. If you do not understand the safety rules, do not attempt to fuel your unit. Call 1-800-554-6723.

FUELING ENGINE

WARNING: Remove fuel cap slowly when refueling.

HELPFUL TIP

To obtain the correct oil mix ratio, pour 3.2 ounces of 2-cycle synthetic oil into one gallon of fresh gas.

ON/STOP

Switch

HOW TO START YOUR UNIT

WARNING: Avoid any contact with the muffler. A hot muffler can cause serious burns.

Starting position

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/WEED EATER brand synthetic oil is recommended. Mix gasoline and oil at a ratio of 40:1. A 40:1 ratio is obtained by mixing 3.2 fluid ounces (95 ml) of oil with 1 gallon (4 liters) of unleaded gasoline. DO NOT USE automotive oil or marine oil. These oils will cause engine damage. When mixing fuel, follow instructions printed on container. Once oil is added to gasoline, shake container momentarily to assure that the fuel is thoroughly mixed. Always read and follow the safety rules relating

to fuel before fueling your unit.

CAUTION: Never use straight gasoline in your unit. This will cause permanent engine damage and void the limited warranty.

FUEL REQUIREMENTS

This engine requires the use of minimum 87 octane [R+M]/2 clean gasoline.

IMPORTANT

Use of alcohol blended fuels (called gasohol or using ethanol or methanol) can cause major en- gine performance and durability problems.

WARNING: Alternative fuels (not gas- oline) such as E--15 (15% alcohol), E--20 (20% alcohol), E--85 (85% alcohol) are NOT classified as gasoline and are NOT approved for use in 2--stroke gasoline engines. Use of alternative fuels will cause problems such as: improper clutch engagements, overheating, vapor lock, power loss, lubrication deficiency, deterioration of fuel lines, gaskets and internal carburetor components, etc. Alternative fuels cause high moisture absorption into the fuel/oil mixture leading to oil and fuel separation.

HOW TO STOP YOUR UNIT

SRelease the throttle trigger.

S Push and release the engine ON/STOP switch. The switch will automatically return to the ON position. Wait 5 seconds before at- tempting to restart unit to allow switch to reset.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE

NOTE: DO NOT squeeze the throttle trigger until the engine has started and runs.

1.Set unit on a flat surface.

2.Slowly press the primer bulb 6 times.

3.Move the start lever to the START posi- tion.

Primer Bulb

Start Lever

Starter Handle

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Avertissement AdvertenciaIdentification of Safety Symbols Table of ContentsIdentification of Safety Symbols Optional Attachments Safety RulesOperator Safety Rope, string, flailing devices, etc Line Trimmer SafetyEdger Safety Transporting and Storage Additional Safety RulesFuel Safety BLOWER/VACUUM SafetyHedge Trimmer Safety Brushcutter SafetyCultivator Safety Or broken Pole Pruner SafetySnow Thrower Safety AnotherAdjusting the Assist Handle AssemblyInstalling Trimmer or Edger Attachments Operation Blade Trimmer Head Depth Adjustment KnobHOW to Start Your Unit HOW to Stop Your UnitStarting a Flooded Engine Installing Optional ATTACH- MentsOperating Instructions Starting a Warm EngineCutting Methods Line Trimmer AttachmentOperating Position Trimmer Line AdvanceMowing Setting the Edging DepthEdger Attachment EdgingMaintenance Replacing the Line Service and AdjustmentsScrewdriver Edger Blade ReplacementReplacing the Trimmer Head Engine Carburetor Idle Speed AdjustmentSeasonal Storage Fuel SystemTroubleshooting Table Cause Remedy Poulan PRO Limited WarrantyStatesville Road Canada, contactPlacement and Repair of Emission

115275026, 952711963 specifications

The Poulan 115275026 and 952711963 are two high-quality replacement parts designed for Poulan chainsaws, known for their reliability and efficient functionality. These components play a crucial role in maintaining the performance of your chainsaw, ensuring that it operates smoothly and effectively during your cutting tasks.

One of the standout features of these replacement parts is their exceptional durability. Made from high-grade materials, they are built to withstand the rigors of heavy use. This durability not only extends the overall lifespan of the chainsaw but also enhances its performance by ensuring consistent power delivery and efficiency. Users can expect these parts to perform well even under challenging conditions, making them ideal for both professional and DIY applications.

In terms of technology, the Poulan 115275026 and 952711963 boast advanced engineering design that helps improve the chainsaw's fuel efficiency. This innovative approach minimizes fuel consumption while maximizing cutting performance, ultimately saving users money on both fuel and maintenance costs in the long run. Additionally, these parts are designed to minimize vibration, providing a smoother operation experience. This not only enhances user comfort but also improves precision during cutting tasks.

Another remarkable characteristic of these replacement parts is their easy installation. Poulan has designed these components to fit seamlessly into a variety of chainsaw models, allowing for quick and hassle-free replacement. This user-friendly design means that even those with limited mechanical skills can easily replace worn-out parts, ensuring their chainsaw is always in top condition.

Furthermore, the Poulan 115275026 and 952711963 are backed by a reputable brand known for its commitment to quality and customer satisfaction. This ensures that users receive a product they can trust, complete with the necessary support and guidance if needed.

In summary, the Poulan 115275026 and 952711963 replacement parts embody the quality and innovation that Poulan is known for in the chainsaw industry. Their durability, advanced technology, ease of installation, and strong brand reputation make them an excellent choice for anyone looking to maintain or upgrade their Poulan chainsaw. Investing in these replacement parts ensures optimal performance and longevity, making them a wise choice for all chainsaw users.
Top Page Image Contents