Line Trimmer Safety, Edger Safety | Poulan 115275026, 952711963

SUse only for jobs explained in this manual (or manuals for optional attachments).

SKeep others including children, animals, by- standers, and helpers at least 50 feet (15 me- ters) away. Stop the unit immediately if you are approached.

LINE TRIMMER SAFETY

WARNING: Inspect the area to be trimmed before each use. Remove objects (rocks, broken glass, nails, wire, etc.) which can be thrown by or become entangled in line. Hard objects can damage the trimmer head and be thrown causing serious injury.

WARNING: Disconnect the spark plug before performing maintenance except carburetor adjustments.

SKeep others including children, animals, by- standers, and helpers at least 50 feet (15 me- ters) away. Bystanders should be encour-

aged to wear safety glasses. Stop engine immediately if you are approached.

SUse only for trimming, scalping, mowing and sweeping. Do not use for edging, pruning or hedge trimming.

SCut from your right to your left. Cutting on left side of the shield will throw debris away from the operator.

S Look for and replace damaged or loose parts before each use. Look for and repair fuel leaks before use. Keep in good working condition.

SHave all maintenance and service not ex- plained in this manual performed by an au-

thorized service dealer.

S Replace trimmer head parts that are chipped, cracked, broken, or damaged in any other way before using the unit.

S Maintain unit according to recommended procedures. Keep cutting line at proper length.

S Use only 0.080″ (2 mm) diameter Poulan PRO brand line. Never use wire, rope, string, etc.

SInstall required shield properly before using

the unit. Use only specified trimmer head; make sure it is properly installed and se- curely fastened.

SMake sure unit is assembled correctly as

shown in this manual.

S Make carburetor adjustments with lower end supported to prevent line from contact- ing any object.

SKeep others away when making carburetor

adjustments.

SUse only recommended Poulan PRO ac- cessories and replacement parts.

EDGER SAFETY

WARNING: RISK OF CUT. KEEP HANDS AND FEET AWAY FROM BLADE AND CUTTING AREA. Do not attempt to clear away cut material or hold material to be cut when the blade is in motion. Make sure powerhead is stopped and spark plug wire is disconnected (or powerhead is disconnected from power source) when removing jammed

material from the cutting blade. Do not grab or hold attachment by the cutting blade.

WARNING: Inspect the area to be edged before each use. Remove objects (rocks, broken glass, nails, wire, string, etc.) which can be thrown by the blade or can wrap around the shaft.

WARNING: Disconnect the spark plug before performing maintenance except carburetor adjustments.

SInspect entire unit before each use. Replace damaged parts. Check for fuel leaks. Make sure all fasteners are in place and securely

fastened.Maintain unit according to recom- mended procedures.

SHave all maintenance and service not ex- plained in this manual performed by an au- thorized service dealer.

S Throw away blades that are bent, warped, cracked, broken, or damaged in any other way. Replace parts that are cracked, chipped, or damaged before using the unit.

SUse only recommended Poulan PRO parts and accessories. Never use wire, wire

rope, string, flailing devices, etc.

SBe sure blade stops turning when engine idles (see CARBURETOR ADJUST- MENTS section of powerhead manual).

SRemove the blade before making carburetor adjustments. Hold the unit by hand. Do not make carburetor adjustments from the blade side of the unit.

SKeep others away when making carburetor adjustments.

SNever start the unit with the clutch housing re- moved. The clutch can fly off and cause seri- ous injury.

SIf blade strikes a foreign object, follow these steps: stop unit and disconnect spark plug wire (or disconnect from power source), in- spect for damage, and repair any damage be- fore resuming operation of the unit.

SNever direct discharge of material toward bystanders nor allow anyone near the area of operation. Use care in directing dis- charge to avoid glass enclosures, automo- biles, and the like.

S Always keep the wheel in contact with the ground.

SKeep all parts of your body away from the blade and muffler.

SAlways push the unit slowly over the ground.

Stay alert for uneven sidewalks, holes in the terrain, large roots, etc.

SDo not force the unit. Use only for jobs ex- plained in this manual. Use only for edging.

Do not abuse unit. Do not use in rain or wet locations.

STo reduce the risk of fire, do not allow exces- sive grass, leaves, or grease to accumulate on the attachment.

S Objects struck by the cutting member can cause serious injuries to persons. The lawn should always be carefully examined and cleared of all objects prior to edging.

SNever operate without blade shield in place and in good working order.

115275026, 952711963 specifications

The Poulan 115275026 and 952711963 are two high-quality replacement parts designed for Poulan chainsaws, known for their reliability and efficient functionality. These components play a crucial role in maintaining the performance of your chainsaw, ensuring that it operates smoothly and effectively during your cutting tasks.

One of the standout features of these replacement parts is their exceptional durability. Made from high-grade materials, they are built to withstand the rigors of heavy use. This durability not only extends the overall lifespan of the chainsaw but also enhances its performance by ensuring consistent power delivery and efficiency. Users can expect these parts to perform well even under challenging conditions, making them ideal for both professional and DIY applications.

In terms of technology, the Poulan 115275026 and 952711963 boast advanced engineering design that helps improve the chainsaw's fuel efficiency. This innovative approach minimizes fuel consumption while maximizing cutting performance, ultimately saving users money on both fuel and maintenance costs in the long run. Additionally, these parts are designed to minimize vibration, providing a smoother operation experience. This not only enhances user comfort but also improves precision during cutting tasks.

Another remarkable characteristic of these replacement parts is their easy installation. Poulan has designed these components to fit seamlessly into a variety of chainsaw models, allowing for quick and hassle-free replacement. This user-friendly design means that even those with limited mechanical skills can easily replace worn-out parts, ensuring their chainsaw is always in top condition.

Furthermore, the Poulan 115275026 and 952711963 are backed by a reputable brand known for its commitment to quality and customer satisfaction. This ensures that users receive a product they can trust, complete with the necessary support and guidance if needed.

In summary, the Poulan 115275026 and 952711963 replacement parts embody the quality and innovation that Poulan is known for in the chainsaw industry. Their durability, advanced technology, ease of installation, and strong brand reputation make them an excellent choice for anyone looking to maintain or upgrade their Poulan chainsaw. Investing in these replacement parts ensures optimal performance and longevity, making them a wise choice for all chainsaw users.