Poulan 952711963, 115275026 Edger Attachment, Setting the Edging Depth, Mowing, Sweeping

Page 14

Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

EDGER ATTACHMENT

OPERATING POSITION

ALWAYS WEAR:

Head Protection

 

Hearing

 

Protection

Eye Protection

Long Pants

 

Heavy Shoes

When operating unit, stand as shown and check for the following:

SWear eye protection and heavy clothing. S Keep right arm slightly bent with right hand

holding the trigger handle of powerhead. S Keep left arm extended with left hand

holding the handle.

S Keep unit below waist level.

S Adjust edger wheel for proper cut depth.

WARNING: Never attempt to adjust the edger wheel when the unit is in operation. Always stop the powerhead, wait until the blade stops turning, and disconnect the spark plug before making adjustments.

EDGING

As you become familiar with use of your edger attachment, you will be able to determine your own operating pace.

Conditions such as depth of cut and material being cut will regulate the speed and time re- quired for your edging job.

SAllow the engine to warm up before you begin

edging.

SIncrease the engine speed before placing the blade in the cut. For best results, run the en-

gine at full throttle while cutting.

S Always work going away from people and solid objects such as walls, large stones, trees, automobiles, etc.

SBe careful when edging near trees or valuable plants. The high speed metal blade may cut

roots and cause damage to the plants.

SIf the blade stalls, immediately move the unit back slightly to allow the blade to restart. If the blade continues to stall, stop the engine, dis- connect the spark plug, and inspect for block- age or damage.

WARNING: Keep the blade area clean. Always release the throttle trigger, push and release the engine ON/STOP switch, disconnect the spark plug and make sure the blade has completely stopped turn- ing before cleaning.

SETTING THE EDGING DEPTH

WARNING: Never attempt to adjust the cut depth when the engine is running. Al- ways release the throttle trigger, wait until the blade stops turning, push and release the en- gine ON/STOP switch, and disconnect spark plug before making adjustments.

Depth Adjustment Knob

1.Loosen the depth adjustment knob.

2.Slide the wheel to the desired position. S Raising the wheel will increase the cut-

ting depth.

S Lowering the wheel will decrease the cutting depth.

3.Tighten the depth adjustment knob se- curely.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Advertencia AvertissementTable of Contents Identification of Safety SymbolsIdentification of Safety Symbols Optional Attachments Safety RulesOperator Safety Rope, string, flailing devices, etc Line Trimmer SafetyEdger Safety BLOWER/VACUUM Safety Additional Safety RulesFuel Safety Transporting and StorageHedge Trimmer Safety Brushcutter SafetyCultivator Safety Another Pole Pruner SafetySnow Thrower Safety Or brokenAdjusting the Assist Handle AssemblyInstalling Trimmer or Edger Attachments Operation HOW to Stop Your Unit Trimmer Head Depth Adjustment KnobHOW to Start Your Unit BladeStarting a Warm Engine Installing Optional ATTACH- MentsOperating Instructions Starting a Flooded EngineTrimmer Line Advance Line Trimmer AttachmentOperating Position Cutting MethodsEdging Setting the Edging DepthEdger Attachment MowingMaintenance Service and Adjustments Replacing the LineScrewdriver Edger Blade ReplacementReplacing the Trimmer Head Fuel System Carburetor Idle Speed AdjustmentSeasonal Storage EngineTroubleshooting Table Cause Remedy Canada, contact Limited WarrantyStatesville Road Poulan PROPlacement and Repair of Emission

115275026, 952711963 specifications

The Poulan 115275026 and 952711963 are two high-quality replacement parts designed for Poulan chainsaws, known for their reliability and efficient functionality. These components play a crucial role in maintaining the performance of your chainsaw, ensuring that it operates smoothly and effectively during your cutting tasks.

One of the standout features of these replacement parts is their exceptional durability. Made from high-grade materials, they are built to withstand the rigors of heavy use. This durability not only extends the overall lifespan of the chainsaw but also enhances its performance by ensuring consistent power delivery and efficiency. Users can expect these parts to perform well even under challenging conditions, making them ideal for both professional and DIY applications.

In terms of technology, the Poulan 115275026 and 952711963 boast advanced engineering design that helps improve the chainsaw's fuel efficiency. This innovative approach minimizes fuel consumption while maximizing cutting performance, ultimately saving users money on both fuel and maintenance costs in the long run. Additionally, these parts are designed to minimize vibration, providing a smoother operation experience. This not only enhances user comfort but also improves precision during cutting tasks.

Another remarkable characteristic of these replacement parts is their easy installation. Poulan has designed these components to fit seamlessly into a variety of chainsaw models, allowing for quick and hassle-free replacement. This user-friendly design means that even those with limited mechanical skills can easily replace worn-out parts, ensuring their chainsaw is always in top condition.

Furthermore, the Poulan 115275026 and 952711963 are backed by a reputable brand known for its commitment to quality and customer satisfaction. This ensures that users receive a product they can trust, complete with the necessary support and guidance if needed.

In summary, the Poulan 115275026 and 952711963 replacement parts embody the quality and innovation that Poulan is known for in the chainsaw industry. Their durability, advanced technology, ease of installation, and strong brand reputation make them an excellent choice for anyone looking to maintain or upgrade their Poulan chainsaw. Investing in these replacement parts ensures optimal performance and longevity, making them a wise choice for all chainsaw users.
Top Page Image Contents