On-Air 1250 Classic user guide ~ 1st Edition ~ 7th August ’01 ~ 4073

Base settings

System Code

Your base station has a default setting of 0000 but you may want to change this.

If you change your System Code keep a record of the new number by writing it in the space provided on page 4.

Base station priority

If you are using more than one base, you can select which base your handset will use.

To change base station priority

C

OK

Press the OK button.

7

 

Press the 7 button.

PQ

RS

 

 

 

Use the UP and DOWN buttons to select the base you require.

The flashing digit on the left of the handset is the base number.

Flashing -0- indicates that no base has priority and the handset will therefore register to the first base it finds.

To change your System Code

C OK

Press OK to confirm.

Intercom

Press the INTERCOM button.

C OK Press the OK button. F1 will appear on the display.

DEF

3

1

OLD

CODE

Press the 3 button.

Press the 1 button.

Enter existing code (0000 if not changed). As you enter each digit in turn the dash will stop flashing. When you have entered four digits all four dashes will then start flashing again.

NEW

CODE

CONFIRM

CODE

C OK

Enter your new System Code. As you enter each digit in turn the dash will again stop flashing.

Enter your new System Code again.

Press the C button twice to exit.

C OK

14

Page 14
Image 14
BT 1250 Classic manual Base settings, To change base station priority, To change your System Code, Base station priority