Enter or correct the number of digits
To set the external line access codeyou dial to make internal calls to other extensions on your switchboard.
Intercom
C OK
ABC
2
GHI
4
1
C OK
Press the INTERCOM button.
Press the OK button. F1 will appear on the screen.
Press the 2 button.
Press the 4 button.
Press the 1 button.
The access code is displayed.
Press the OK button.
Enter or correct the switchboard external line access code, e.g. 9. You can enter codes up to 8 digits in length.
C OK | Press the C button three times to exit. |
Note
For the external line access code to be dialled for external calls only, it is important that all external numbers stored in your handset directory must contain more digits than the number of digits required to make an internal call to other extensions on your switchboard. This is most likely to occur when you have local external numbers stored in the handset directory without the area code. To overcome potential problems ensure that all numbers are stored complete with area code.
C | OK | Press OK to store. |
C | OK |
|
C | OK | Press the C button three times to exit. |
C | OK |
|
To activate and
To set the number of digits
Intercom
C OK
Press the INTERCOM button.
Press the OK button. F1 will appear on the display.
Intercom
C OK
ABC
2
GHI
4
ABC
2
C OK
Press the INTERCOM button.
Press the OK button. F1 will appear on the screen.
Press 2. Press 4. Press 2.
The number of digits is displayed.
Press the OK button.
ABC
2
GHI
4
DEF
3
C OK
C OK
C OK
Press the 2 button.
Press the 4 button.
Press the 3 button.
Use the UP or DOWN button to select
0to
Press the C button three times to exit.
C OK
28
