Muratec F-65 Adjust the monitor speaker’s volume, Installing / Changing the Ink Film

2 To change the setting, press or once or twice until the paper size you are loading appears. In this example, we chose legal-sized paper.

PaperSize:Legal

3 Press ENTER to save the setting.

Adjust the monitor speaker’s volume

To adjust the volume of the monitor speaker:

Note: You cannot set the volume of the monitor while the fax machine is commu- nicating.

1 Press MONITOR / CALL on the control panel. You now should hear a dial tone, and the display will show:

	** Tel Mode **
	Important: If you don’t hear a dial tone, make sure your fax machine is
	plugged into a working phone line.
2	If the volume you hear is satisfactory, skip to step 4.
	If not, go on to step 3.
3	Adjust the volume as you wish:
	To turn the volume up, press . To turn the volume down, press .

The LCD indicates the volume. The possible settings are:

Volume:	= Loudest setting.
Volume:	= Medium setting.
Volume:	= Lowest setting.

4 Press MONITOR/CALL again to hang up.

Getting started

Installing / Changing the Ink Film

Note: Your fax machine can’t print without ink film. If it runs out of ink film, the machine beeps and displays:

Check Ink Film

Your fax machine uses Muratec’s Film Imaging system to provide high-quality fax printouts and copies on plain paper. Film Imaging uses only clean, easy-to-handle and easy-to-load ink film.

Note: The pre-installed starter roll of ink film is only 1/10 the size of a normal roll. Please obtain a full-size replacement roll from your authorized Muratec dealer, or call 1-800-543-4636 toll-free. For the best results and longest life from your fax machine, please use only Muratec-brand ink film, which is designed specifically for your fax model.

To change the ink film:

1 Remove the document hopper, if necessary.

2 Press the top cover release to open the top cover of the fax machine.

3 Grab the handles on each side of the ink film cartridge, and lift the cartridge straight up out of the machine.

1.9