Muratec F-65 Security reception, Using your fax machine during operation protection

Press ENTER. The LCD shows the machine’s current clock setting:

Security Rx: Off

5 If the setting you see is acceptable, skip to step 7. If not, go on to step 6.

6 To change the setting, press or once or twice until the setting you want appears. In this example, we chose “On.”

Security Rx: On

Press ENTER. The LCD shows:

7

1

2

3

4

Beyond the basics

Using your fax machine during operation protection

1 When you press any key on your machine, the LCD shows:

Passcode :****

2 Use the numeric keypad to enter the four-digit passcode (here, we enter the passcode we set previously; see page 2.37).

Passcode :6296

If you enter the correct four-digit passcode, the machine now will let you go on to the next step in the fax operation.

Note: If you start an operation while the first is still underway, the machine will again ask for the passcode before proceeding with your new request. However, the first operation will proceed unaffected, even if you fail to enter the correct passcode for the second entry.

Security reception

With your fax machine’s security reception, you can tell it to keep all received faxes in memory and not to print them. Later, you instruct it to print out the saved faxes. This is great if, for example, you have concerns about after-hours workers nosing around in documents intended for your eyes only!

Important: For this feature to work, you must have preset the passcode (see page 2.37) to something besides 0000. You must also know the passcode.

Note: In the following instructions, your machine’s LCD shortens the word Transmission to Tx and the word Receive to Rx.

Activating security reception

Press PROGRAM, K, 1.

Set Security Rx

Press ENTER. The LCD shows:

Passcode :****

Use the numeric keypad to enter the passcode. Here, we enter 6296:

Passcode :6296

Time : 15:42

8 If you want security reception to begin now (and at this same time every day), skip to step 10.

If not, go on to step 9.

2.38