Muratec F-65 operating instructions Enter Password, 654321, Code polling, Code Polling

Beyond the basics

Enter Password

then it will show:

_

Note: If you know that this subaddress does not have a password, skip to step 7.

6 Use the numeric keypad to enter the appropriate password. In this example, we enter 654321.

654321_

7 Press ENTER. The LCD shows briefly:

Enter Fax Number

then it will show:

_

8 Enter the fax number either by pressing a one-touch key, entering a speed- dial number or dialing from the numeric keypad.

Do not press START.

9 What you do now depends upon when you want the transmission to begin.

•To have it begin now, skip to step 12.

•To delay it, proceed to step 10.

10 Press COM-OPTIONS,COM-OPTIONS,ENTER. The LCD shows:

Time: 15/17:05

11 Use the numeric keypad to enter the day and time when the transmission should begin, then press ENTER.

12 Press START.

If you chose an immediate transmission in step 9, your fax machine will begin dialing. If you chose a delayed command, the machine will display

“** Reserved **” on the LCD, indicating that the machine has stored the command in memory and will perform it later.

Note: The ITU-Tsubaddress and password can be up to 20 characters in length and can include any combination of numbers and the * and # symbols. Do not include other non-numerical characters.

Note: To change a number you have already entered:

—Press to move the cursor to the left or to move it to the right, to that character.

—Press CANCEL to erase the character.

—Enter the digit(s) you want.

F-code polling

Polling with ITU-Tsubaddress / password:

1 Press COM-OPTIONSsix times.

6.F-Code Polling

2 Press ENTER. The LCD shows briefly:

Enter SubAddress

then it will show:

_

3 Use the numeric keypad to enter the appropriate subaddress. In this example, we enter 123456:

123456_

4 Press ENTER. The LCD shows briefly:

Enter Password

then it will show:

_

5 Use the numeric keypad to enter the appropriate password number. In this example, we enter 654321.

654321_

Note: If you know that this sub-address does not have a password, skip to step 6.

2.26