Muratec F-65 Using speed-dial numbers, Enter Speed-Dial, 01No Number, 05No Number, 05Fax Number

If you change your mind and want to select a different speed-dial number, just repeat step 3 until the number you want appears, then go on to step 5.

Beyond the basics

5 Press ENTER. The LCD shows:

Check Prog/Enter

Important: If you want to quit without erasing the one-touch number you have selected, press PROGRAM. The fax will return to step 3.

6 Press ENTER to erase the number.

** Complete **

To erase another one-touch number, repeat steps 3–6. Or press STOP to return to standby mode.

Printing a list of your one-touch numbers

If you forgot which number is stored in which one-touch key, just print a list of your one-touch numbers. The list includes each key’s letter, the Location ID, number and group number(s) you may have stored in the key.

To print the list, press PROGRAM, A, 3, ENTER.

Using speed-dial numbers

As we mentioned before, your fax machine will store up to 85 speed-dial numbers, designated by two-digit identifier codes from 01 (the first number) through 85.

Important: Speed-dial numbers 1-9 require a leading zero when entering them into the machine. For example, enter 01, not just 1.

Speed-dial numbers 10–85do not require leading zeroes.

Entering or changing a speed-dial number

Important: To erase a number, see “Erasing a speed-dial number” (page 2.10).

1 Press PROGRAM, B, 1.

Enter Speed-Dial

2 Press ENTER. Depending on whether you already have a number entered for speed-dial number 01, the LCD shows:

01:No Number or 01:555-584-6950

If 01 is the speed-dial number you want to set, skip to step 4. (However, our examples from here will say “05” rather than “01.”)

3 Use the numeric keypad to enter the desired speed-dial number’s two-digit identifier code. Here, we enter 05 and the LCD shows either:

05:No Number or 05:555-397-0123

4

5 Press ENTER. Depending on whether you already have a number entered for this speed-dial number, the LCD now shows briefly:

05:Fax Number

then it will show either:

_ or 555-397-0123_

6 Use the numeric keypad to enter the number exactly as your machine should dial it, including whatever access codes your phone system may require. (You may want to review “Special dialing characters,” page 2.7.) The number can be up to 40 characters in length:

9-1-555-9292039_

Note: Your display can show only 16 characters at a time. To view characters beyond those 16 (such as with an international long-distance num- bers), press to scroll to the left or to scroll to the right.

Note: To change a character you have already entered:

—Press to move the cursor to the left or to move it to the right, to that character.

—Press CANCEL to erase the character.

—Enter the digit(s) you want.

7 When the number is as you want it, press ENTER to store it.

2.10