Muratec F-65 operating instructions Blue leader film

Remove the new ink film roll from its packing.

Turn the ink film cartridge over and rest it upside down on its handles.

Getting started

4

5 Grasp the cartridge frame firmly and slide out the ink film rolls from the cartridge.

6 Remove the gears from the ends of the used film rolls.

Note: Please dispose of the used rolls properly.

7

8 Insert the gears into the ends of the new ink film rolls, making sure to align the tab on the gears with the slot on the ends of ink film rolls.

9 Snap the new rolls into the ink film cartridge. The ink film cartridge includes illustrations to help you correctly install the rolls.

10 Turn the rolls as shown until only the black ink film — and none of the blue leader film — is showing. You cannot print with the blue leader film.

Blue leader film

11 Now you are ready to put the car- tridge back in the machine. Turn the cartridge right-side up again and position the cartridge so that its arrow mark is over the machine’s arrow mark.

Note: The supply roll should be in the front of the machine.

Gently put the cartridge back into the machine. If you position it cor- rectly, it will “drop” in smoothly.

Note: If the cartridge isn’t inserted properly, your fax machine won’t work .

12 Close the top cover of your fax machine. You will feel a click when it’s closed.

Note: Your fax machine won’t work if the top cover isn’t closed.

13 Re-attach the document hopper, if you removed it in step 1.

1.10