Muratec F-65 Sending faxes, Some guidelines, How big and small your pages can be

Sending faxes

Some guidelines

How big — and small — your pages can be

You can fax a piece of paper as small as a notepad sheet or nearly 3 feet long! To be precise, the acceptable dimensions (width × length) are:

SINGLE-SHEET TRANSMISSION MULTIPLE-SHEET TRANSMISSION

Document thickness: 0.06 to 0.13 mm

Note: The maximum width of the scanned area is 8.2 inches. This means there will be a 0.16-inch margin on each side of the page that your fax machine will not scan.

Getting started

Things not to put in your fax

To avoid paper jams and damage to your machine, do not insert:

•Folded, curled, torn, wrinkled or very thin pages

•Documents with staples, glue, tape, paper clips or still-wet correction fluid

•“Sticky notes” (or documents with “sticky notes” attached)

•Cardboard, newspaper or fabric

•Pages with duplicating carbon on either side

•Credit cards or similar small, thick items

Some thoughts on resolution, grayscale and contrast

Reviewing resolution and grayscale

•Normal resolution is suitable for most typed documents and simple drawings.

•Fine resolution is ideal for maps, floorplans or handwritten documents.

•Superfine resolution reproduces the detail of extremely complicated drawings or line art.

•Grayscale mode (“HALFTONE” on the control panel) captures shades in photos and drawings.

Note: If you send a fax in superfine, there are some machines that receive it only in fine mode. However, you can send a fax in grayscale mode to virtually any fax machine currently in use.

To change the resolution setting, press RESOLUTION repeatedly. As noted above, if neither the FINE, S-FINEnor HALFTONE LED (light-emitting diode) is glowing, your fax is set for normal resolution. Otherwise, a glowing LED indicates the fax is using that setting. For example, in the drawing (left), the machine is set for fine resolution.

1.15