Muratec F-65 operating instructions Code polling, Limiting polling access to your fax machine

Beyond the basics

C,9-5551204,S05

Important: Do not insert a comma after the last fax number.

Note: If you enter characters by mistake, just press CANCEL to clear them before proceeding.

6 To perform the sequential polling now, skip to step 10. To perform delayed sequential polling, proceed to step 7.

7 Press COM-OPTIONS,COM-OPTIONS,ENTER.

The LCD shows the current day and time:

Time: 15/17:05

8 Use the numeric keypad to enter the date and time your machine should per- form the delayed sequential polling.

9 Press ENTER.

10 Press START.

When it performs the polling command, your machine will dial the number and, upon making contact with the other machine, begin receiving the document as if the other machine had placed the call.

F-code polling

See pages 2.26–2.27.

Being polled

Not only can you poll, you also can be polled. To set up a document for regular polling by another machine:

1 Press RECEIVE to change your fax machine to the Fax Ready mode. In the Fax Ready mode, neither the TEL, TEL/FAX nor ANS/FAX light is glowing.

Important: Your machine cannot be polled if it’s in Tel Ready mode.

2 Insert the document.

3 Adjust resolution and contrast if necessary.

4 Press PROGRAM, D, 1. The LCD shows:

Store PollingDoc

5 Press ENTER. Your fax machine scans the document into memory and returns to standby mode.

Note: If you were using another reception mode before step 1 and want to return to it after the remote machine has polled your document, press RECEIVE to select a new mode.

But do this only after you are sure the remote machine has polled your document.

Erasing a stored polling document

To erase from your machine’s memory a document you’ve stored for regular or data- base polling by another machine:

1 Press PROGRAM, D, 2. The LCD shows:

Erase PollingDoc

2 Press ENTER. Your fax machine will erase the document from memory.

Printing a stored polling document

To print, without erasing, a document you’ve stored for regular polling:

1 Press PROGRAM, D, 3. The LCD shows:

Print PollingDoc

2 Press ENTER. Your fax machine will print the document.

Limiting polling access to your fax machine

Your machine’s closed network setting (see page 2.42) also works for polling. When you set the passcode (see page 2.42), a calling fax that doesn’t “present” the proper passcode, it cannot poll from your fax.

Note: However, if you are using the Block Junk Fax feature (see pages 2.42–2.43), even incoming calls which meet the passcode test must come from appropri- ate phone numbers.

2.20