JVC HM-HDS1U manual Access DBS Receiver, SET DBS Receiver Brand

20 EN

Turn on the TV and select the AV mode.

INITIAL SETTINGS (cont.)

ACCESS DBS RECEIVER

BRAND SET SCREEN

7 Press # (or 3) or OK.

SET DBS RECEIVER BRAND

Press the appropriate

NUMBER keys to enter DBS RECEIVER BRAND SET

8 the DBS Receiver Code

POWER

HM-HDS1

MENU	EJECT
	DIGITPURE TECHNOLOGY

REC LINK		STOP	PLAY	PAUSE	REC	S-VHS ET
		HDD				S-VHS		VIDEO	(M) L – AUDIO – R
MENU	NAVI					REW	FEW
OK									S-VIDEO
	CH					A. DUB			PAUSE
								F - 1

OK

from the following list,
then press # (or 3) or
OK.
	PRESS NUMBER KEY(0-9)
	THEN(OK) TO TEST
	PRESS(MENU) TO END
BRAND			CODE
JVC (DISH Network)		51
ECHOSTAR (DISH Network)		51
PRIMESTAR		50
SONY (DSS)		41
RCA (DSS)		40

●After OK is pressed, the program currently received through the DBS receiver will appear for about 10 seconds.

●If the DBS receiver's channel changes to the channel listed below for your brand of DBS receiver, setting is complete. Press OK and “DBS RECEIVER CONTROL IS ON” appears on the screen for about 5 seconds, then it returns to the Initial Set Up screen. To returns to the normal screen, press MENU.

	1
	2
	1	2	3
NUMBER	4	5	6
	7	8	9
	<	0	>
	1
	2

OK

– +

3

4

MENU

OK

JVC [ 100

ECHOSTAR [ 100

PRIMESTAR [ 55

SONY [ 205

RCA [ 205

●If the DBS receiver's channel does not change as shown above, press %fi (or 5∞) repeatedly until “NO” appears, then press OK. Re-enter the correct code.

NOTES:

●It is possible that the Controller will not work with all types of DBS receiver.

●If your DBS receiver doesn’t respond to the code, you can’t use the Controller to change satellite channels. In this case, make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start of timer recording.

●The recorder can only change the satellite channel through the Controller during timer recording.

●If your DBS receiver is one that can’t be operated with a remote control (because it has no remote sensor), you can’t use the Controller to change its channels. Make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start of timer recording.

●If you are unable to set the Controller, please contact JVC toll free at 1-800-252-5722.