JVC HM-HDS1U manual Engage S-VHS ET Mode, Super VHS ET

EN 51

Super VHS ET

Your recorder is equipped with Super VHS ET that makes it possible to record with S-VHS picture quality on VHS cassettes.

ENGAGE S-VHS ET MODE

1 Press S-VHS ET on the front panel. You can check the current setting (“S-VHS ET : ON” or “S-VHS ET : OFF”) if “SUPERIMPOSE” is set to “ON” (pg. 41). If “S-VHS ET

:OFF” appears on the TV screen, press S-VHS ET again in about 5 seconds later to set it “ON”.

•The S-VHS indicator lights up on the front display panel.

To cancel S-VHS ET, press the button again.

POWER

EJECT

NOTES:

DIGITPURE TECHNOLOGY

HM-HDS1

REC LINK	STOP	PLAY	PAUSE	REC	S-VHS ET
	HDD				S-VHS	VIDEO	(M) L – AUDIO – R
MENU NAVI					REW FEW
OK							S-VIDEO
CH					A. DUB		PAUSE

F - 1

●You cannot activate the S-VHS ET function...

...while recording is in progress.

...while timer-recording (incl. Instant Timer Recording

pg. 64) is in progress.

...while Video Calibration ( pg. 47) is in progress.

...when the recorder’s power is off.

●S-VHS ET does not work with S-VHS tapes.

S-VHS ET

This facility allows recording with S-VHS picture quality on VHS cassettes. You can play back those cassettes recorded in S-VHS ET on a VCR equipped with S-VHS ET.

NOTES:

●To obtain the highest quality recording and playback pictures over a longer period on this model, S-VHS recording on S-VHS tape is recommended.

●You can play back S-VHS ET recordings not only on this recorder but also on another VHS VCR equipped with S-

VHS ET.

*It is recommended to specifically label S-VHS ET recordings so you can easily distinguish them from regular VHS recordings.

●S-VHS ET recordings can also be played back on an S- VHS VCR or a VHS VCR equipped with SQPB (S-VHS QUASI PLAYBACK) function. However, there may be cases where S-VHS ET playback is not possible on a particular VCR.

●Frequent still, frame-by-frame and slow-motion playback may damage the tape and cause picture degradation.

●With some tapes, better picture quality may not be obtained even with S-VHS ET recording. It is recom- mended that you do test record beforehand to make sure whether better results can be obtained.

●High Grade tapes are recommended for superior results.

●Make sure that “VIDEO CALIBRATION” is set to “ON” at the Function screen ( pg. 47).

●During S-VHS ET playback, noise may appear depending on tape quality.

●Noise may appear during still, frame-by-frame and slow- motion playback.

●If the playback picture becomes blurred or interrupted, use a cleaning cassette.