JVC HM-HDS1U manual SET Channel Number, SET Weekly or Daily, SET Category

7

8

9

10

11

SET CHANNEL NUMBER

Press CH +/–.

●If you are using a DBS receiver, see “ATTENTION FOR DBS RECEIVER USERS” on next page.

●Holding down CH +/– rapidly scans through the channels.

SET TAPE SPEED

Press REC SPEED to set the tape speed. Each time the button is pressed, the recording speed changes as follows:

For HDD deck:

SP = LP = EP = SEP = SP = ···

For VHS deck:

SP = EP = SP = ···

SET WEEKLY OR DAILY

Press WEEKLY (NUMBER “9”) for weekly serials or DAILY(M-F)(NUMBER “8”) for daily serials (Monday– Friday).

●When WEEKLY is selected in the HDD deck recording, the recorder reserves certain space corresponding to one-program-period, then writes new data over the recorded data every week.

●When DAILY(M-F)is selected in the HDD deck recording, the unit reserves certain space corresponding to five-programs-periods, then writes new data over the recorded data everyday (from Monday to Friday).

SET CATEGORY

1) Press @# (or 23) to	CATEGORY
move the arrow to
	CHILDRENS		CLASSICS	COMEDY	DRAMA
“CATEGORY”, then
	EDUCATIONS		MOVIES	MUSIC	NEWS
press OK. The
	RELIGIOUS		SERIES	SHOPPING	SPECIAL
Category Set screen	SOAPS		SPORTS	OTHERS	MISC.
appears.	RETURN
2) Select the desired
	INDEX	PROG.
category by pressing			SELECT WITH [∞523]
	SELECT OK	END THEN PRESS [OK]

@%#fi (or 253∞),

then press OK. The Program screen resumes.

RETURN TO NORMAL SCREEN

Move the arrow to “CONFIRM” by pressing @%#fi (or 253∞), then press OK. “PROGRAM COMPLETED” appears on the screen for a while, then normal screen appears.

•If there is a conflict in the timer schedule and one program overlaps with another, the correction screen will appear. In this case, correct the program data. See page 61.

•If you select VHS deck, press TIMER. The recorder turns off automatically and "‰" is displayed on the display panel.

EN 59

NOTES:

●To disengage the timer before recording starts, press TIMER again. Pressing once more re-engages it.

●In case of a power failure after programming, the recorder’s memory backup keeps your selections for approximately 60 minutes.

●Programs that start after midnight must have the next day’s date.

●After timer recording is completed, the recorder’s power goes off automatically.

●You can program the timer while a regular recording is in progress; the on-screen menu will not be recorded.

●If the end of tape is reached during timer recording, the cassette is automatically ejected.

●When timer-recording cable or satellite channels through an external tuner, be sure to keep the cable box or satellite receiver's power ON.

ATTENTION FOR DBS RECEIVER USERS

If you are using a DBS receiver (unless “DBS RECEIVER SET“ is set to “OFF”
pg. 19), the BAND indication (TV or CATV or DBS) appears under the channel number display. If the channel number that has been entered requires that the band be set, “7=DBS” is displayed on the screen. Press the NUMBER key “7” to select the desired band.

a– TV	: To timer-record a regular TV program received
	on the recorder.

b– CATV : To timer-record a cable TV program received on the recorder, or through a cable box (unless “CABLE BOX SET” is set to “OFF”
pg.16).

c– DBS : To timer-record a satellite program received through a DBS receiver.

●If “BAND” is set to “TV” at the Tuner Set screen (
pg.13) and “CABLE BOX SET” is set to “OFF” at the Cable Box Set screen (
pg. 16), CATV will not be displayed on the Program screen; If “BAND” is set to “CATV” or “CABLE BOX SET” is set to “ON”, TV will not be displayed.