JVC HM-HDS1U manual Check Program Data

CHECK PROGRAM DATA

EN 55

IMPORTANT

6

The PlusCode number you entered and the matching Timer- Recording information are displayed on the Program screen. Check to make sure their correct.

PROGRAM

PLUS CODE NO. 1 2 3 6 5

	RECORD TO					SPEED	DAIRY/WEEKLY	SOURCE
			HDD			SEP	WEEKLY	CATV
	START TIME					STOP TIME	DATE	CH
		11:30 PM				12:00 AM	06/12/01 TUE	5 CH
	CONFIRM					CANCEL	CATEGOTY	MISC.
						PROG. SET PROPGRAM WITH [EXPRESS +/–, 8=DAILY,
	+		+	+	+
	–		–	–	–	9=WEEKLY, 7=DBS] THEN PRESS "CONFIRM"
START			STOP	DATE	CH	END

If you have moved to a different area or if a broadcasting station´s channel number has been changed, the wrong VCR or CABLE CH number will be displayed on the VCR Plus+ program screen in step 6. When this happens, set the correct the Guide Channel number for that station. (
pg. 56, “Changing VCR Plus+® Setting”)

7

8

●To change the stop time, press STOP +/–.

●To timer-record daily or weekly serials, press DAILY (NUMBER key “8”) or WEEKLY (NUMBER key “9”). “DAILY” or “WEEKLY” appears on the Program screen. Pressing the button again makes each corresponding display disappear.

●You can also set category. 1) Press @# (or 23)

to move the arrow	CATEGORY
to “CATEGORY”,	CHILDRENS	CLASSICS	COMEDY	DRAMA
then press OK. The	EDUCATIONS	MOVIES	MUSIC	NEWS
	RELIGIOUS	SERIES	SHOPPING	SPECIAL
Category Set screen
	SOAPS	SPORTS	OTHERS	MISC.
appears.
2) Select the desired	RETURN
category by pressing
@%#fi (or
253∞), then press
OK.

2)Confirm the arrow is on the “RETURN”, then press OK. The Program screen resumes.

●If you want to cancel this reservation, move the arrow to “CANCEL” by pressing @# (or 23), then press OK. Or, press PROG.

SET TAPE SPEED

Press REC SPEED. Each time the button is pressed, the recording speed changes as follows:

For HDD deck:

SP = LP = EP = SEP = SP = ···

For VHS deck:

SP = EP = SP = ···

RETURN TO NORMAL SCREEN

Move the arrow to “CONFIRM” by pressing @%#fi (or 253∞), then press OK. “PROGRAM COMPLETED” appears on the screen for a while, then normal screen appears.

●If there is a conflict in the timer schedule and one program overlaps with another, the correction screen will appear. In this case, correct the program data. See page 60.

●If you select VHS deck, press TIMER. The recorder turns off automatically and "‰" is displayed on the display panel.

NOTES:

●To disengage the timer before recording starts, press TIMER again. Pressing once more re-engages it.

●In case of a power failure after programming, the recorder’s memory backup keeps your selections for approximately 60 minutes.

●When timer-recording cable channels received through a Cable Box, be sure to keep the Cable Box set to ON.

●It is not possible to timer-record the same programme on both the VHS deck and the HDD deck simultaneously.

●If the times that are programmed for recording on the HDD deck and on the VHS deck overlap, the earlier start time takes precedence. If the start times are the same, the VHS deck takes precedence.