JVC HM-HDS1U SET Auto Clock to on, Select Host Channel, Select D.S.T. Mode, Select Time Zone

Semi-Auto

You can change the Host Channel/D.S.T. /Time Zone setting manually.

5		SET AUTO CLOCK TO ON
		At the Clock Set screen,
				CLOCK SET
		press # (or 3) or OK
		repeatedly to move the		TIME	DATE YEAR
				– –:– –AM	1/ 1 01
		highlighted bar to
				AUTO CLOCK:ON
		“AUTO CLOCK”, then
				HOST CH	:AUTO (TV)
		press %fi (or 5∞) to set		D.S.T.	:AUTO
		to “ON”.		TIME ZONE :AUTO
		a– To select the Host	SELECT WITH[5,∞] THEN[OK]
		Channel — go to step	PRESS[MENU] TO END
	6
		b– To select the D.S.T. mode — go to step 7
		c– To select the Time Zone — go to step 8
		NOTE:
		The time that has been set previously will be erased
		when “AUTO CLOCK”, “HOST CH”, “D.S.T.” or “TIME
		ZONE” setting is changed.
6		SELECT HOST CHANNEL
		You can either select “AUTO” or enter a PBS channel
		Pressnumber.# (or 3) or OK repeatedly to move the high-
		lighted bar to “HOST CH”, then press %fi (or 5∞) to
		set to “AUTO” or the desired PBS channel number.
		NOTE:
		There are some PBS channels that do not transmit clock
		setting data.
7		SELECT D.S.T. MODE
		You have three choices:
		a– Select “AUTO” and the adjustment to your
		recorder's clock will be made according to the
		incoming signal from the host channel.
		b– Select “ON” and the adjustment will be made based
		on the clock itself.
		c– Select “OFF” if Daylight Saving Time does not apply
		to you.
		Press # (or 3) or OK repeatedly to move the high-
		lighted bar to “D.S.T.” and press %fi (or 5∞) to select
		the desired mode.

**AUTO DAYLIGHT SAVING TIME

This function enables automatic adjustment of the recorder’s clock at the start and end of Daylight Saving Time.

With Auto DST activated, . . .

. . . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.

. . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.

EN 11

SELECT TIME ZONE

8 You can select the time zone automatically or manually. Press # (or 3) or OK repeatedly to move the high- lighted bar to “TIME ZONE”, then press %fi (or 5∞) to select “AUTO” or the desired time zone.

AUTO ATLANTIC

HAWAII EASTERN

ALASKA CENTRAL

PACIFIC MOUNTAIN

NOTE:

If an incorrect time is displayed by the Plug & Play function, you may be receiving the clock setting data of a PBS channel from an adjacent time zone or from an incorrect PBS channel from a cable TV system. If you selected “AUTO” for the host channel in step 6, be sure to select the correct time zone manually.

RETURN TO NORMAL

SCREEN

9 Press MENU. The Initial Set Up screen appears, then press MENU again.

IMPORTANT

Turn the recorder off after performing the Semi-Auto Clock Set procedure. “AUTO” will appear on the front display panel when the clock is being set. The current time will appear automatically when the clock is set.

CONTINUED ON NEXT PAGE