PLAYBACK FEATURES for HDD deck | EN 27 |
Live Memory Playback
Equipped with a hard disk drive, this recorder allows informa- tion to be written to and read from the hard disk at high speeds. Taking advantage of this feature, you can temporarily record programs received with the tuner or from an externally- connected equipment — CATV or DBS, and can watch them only a few seconds behind actual air time.
In this recorder, viewing a program through HDD (not a recorded program) means you are always watching the program temporarily recorded on it.
This feature enables you to reverse the program back to view any previous part of it — so called “Live Memory Playback”, which was impossible until now.
To access “Live Memory Playback”, all that you have to do is to turn on the recorder and select the HDD deck.
So, the temporary recording is started on the HDD deck. And, you can select the length of the time for temporary recording from off, 30 minutes, 1 hour, and 3 hours.
About “Live Memory Playback”
With a certain amount of space (for 30 minutes, 1 hour, and 3 hours) reserved on the hard disk, the recorder records broad- casts being received or signals input from an externally connected equipment.
Even while you are reversing the program to review any previous part, the recorder continues recording the same program or
When the reserved amount of time (or space) runs out, the recorder overwrites the previous recordings on the hard disk, starting with the oldest one, repeatedly if necessary. After having recorded a certain number of programs, if you try to increase the amount of your reserved time on HDD, you may not be allowed to do so because of possible lack of available space, and the recorder will inform you of this by displaying a message on the screen.
About limitation on Live Memory Playback
Recording to perform Live Memory playback, which means the use of temporary recording on the hard disk, works for signals from
The temporary recording for Live Memory is canceled in the following cases, and will start all over again when it is to resume.
•When channels are changed
•When the power is turned off
•When the thumbnails are changed
•When the setting for Live Memory playback is changed
•When recording is started via the HDD deck or the VHS deck
•When a recorded program is played back or deleted
Setting Time for
Live Memory Playback
| ACCESS MAIN MENU |
1 | SCREEN |
Press MENU. | |
● If you want to stop the following procedure on its | |
way, press MENU. |
| ACCESS HDD SET UP |
| ||
2 | SCREEN |
|
|
|
1) Press @# (or 23) to | HDD/VHS SET UP | FUNCTION SET UP | INITIAL SET UP | |
move the arrow to | HDD SET UP | VHS SET UP 1 VHS SET UP 2 | ||
|
|
| ||
“HDD/VHS SET UP”, | LIVE MEMORY | 1 HR. | ||
|
|
| ||
then press fi (or ∞) or |
|
|
| |
| OK. |
|
|
|
| 2) Press @# (or 23) to |
|
|
|
| move the arrow to | INDEX | MENU |
|
|
| SELECT WITH [∞523] | ||
| “HDD SET UP”, then |
| ||
| SELECT OK | END THEN PRESS [OK] | ||
| press fi (or ∞) or OK. |
|
|
|
| SELECT LIVE MEMORY |
|
| ||||
3 | MODE |
|
|
|
|
|
|
1) At the “LIVE |
| HDD/VHS SET UP | FUNCTION SET UP INITIAL SET UP | ||||
MEMORY”, press OK. |
| HDD SET UP | VHS SET UP 1 | VHS SET UP 2 | |||
2) Press %fi (or 5∞) to |
|
|
|
|
|
| |
| LIVE MEMORY | 1 HR. | |||||
select the desired |
|
|
|
| OFF |
| |
|
|
|
| 30 MIN. |
| ||
| mode, then press OK. |
|
|
|
| 1 HR. |
|
|
|
|
|
| 3 HR. |
| |
| a– Select “OFF” if you |
|
|
|
|
|
|
| do not want to use |
| INDEX | SELECT WITH [∞523] | |||
|
|
| MENU |
|
| ||
| the Live Memory |
| SELECT OK | END THEN PRESS [OK] | |||
|
|
|
|
|
|
| |
| Playback. |
|
|
|
|
|
|
b– Select “30 MIN.” if you want to use the Live Memory Playback for up to 30 minutes.
c– Select “1 HR.” if you want to use the Live Memory Playback for up to an hour.
d– Select “3 HR.” if you want to use the Live Memory Playback for up to 3 hours.
RETURN TO NORMAL
SCREEN
4 Press MENU.
Start Live Memory
Playback
You can start Live Memory Playback by pressing @ (or 2) or 1, then press PLAY. When you press @ (or 2) to start Live Memory Playback, the recorder will rewind the pictures to the point where Live Memory time counter shows “00” or “30” in its minutes’ place (or to the beginning of the program), then start Live Memory Playback automatically.
You can use various playback features during Live Memory Playback. (See pages 30 and 31.)
•To stop Live Memory Playback, press STOP. The
