JVC HM-HDS1U manual SET RECORDER’S Input Mode, Select Edit for PIC, Start Player, Start Recorder

POWER

HM-HDS1

					PLAY	DIGITPURE TECHNOLOGY
REC LINK	STOP	PLAY	PAUSE	REC		S-VHS ET
	HDD				S-VHS
MENU NAVI						REW FEW
OK
CH						A. DUB

CH+/ –

EJECT

VIDEO (M) L – AUDIO – R

S-VIDEO

PAUSE

F - 1

EN 79

SET RECORDER’S INPUT

MODE

4 Press CH +/– to select depending on the connector being used – “L-1” for the front panel input connectors, or “R-1” for the rear panel input connectors.

NOTE:

If you use your recorder as the recorder and have connected another VCR to your recorder´s S-VIDEO IN connector, you need to set “REAR AUX INPUT” to “S- VIDEO” at the Mode Set screen. Follow steps 5 – 7 from the “Edit From A Camcorder” section ( pg. 76 and 77).

1

2

1 2 3

4 5 6

7 8 9

< 0 >

1

2

PLAY

–+

3

4

CH+/–

	SELECT “EDIT” FOR PIC-
	TURE CONTROL SET MODE
5	(VHS DECK ONLY)
	Follow the “Picture Control” section on page 44, then
	select “EDIT.”
	NOTE:
	When you select “EDIT” to dub tapes, be sure to select
	“AUTO” or (“NORM” when “VIDEO CALIBRATION” is
	set to “OFF”) after you finish dubbing the tapes.

6	START PLAYER
	Set to its play mode.
	NOTE:
	If the player is equipped with a superimpose/OSD
	disable feature then set “SUPERIMPOSE” to “OFF”
	before pressing PLAY ( pg. 28 for HDD deck, pg. 41
	for VHS deck).

START RECORDER

7 Set to its record mode.

NOTE:

If you use an auxiliary input to connect a cable box or DBS receiver, make sure that the correct AUX INPUT (“VIDEO” or “S- VIDEO”) is selected after you have finished editing ( pg. 22).