Muratec F-65 operating instructions Enter PIN Number, 1057, S01

If you specified “Mode 1”

In this mode, before autodialing a number for the first time, you must add the its stored one-touch key or speed-dial number. Here’s how:

1 Use the EasyDial directory to enter a name. The LCD shows:

The following instructions presume you are familiar with how to set and use your machine’s autodialer. If you need to review, see pages 2.7–2.13.

If the PIN mask feature is off, you use the autodialer normally.

Autodialing while using the PIN mask

Press ENTER.

PIN Mode: Off

5 If the setting you see is acceptable, skip to step 7. If not, go on to step 6.

6 To change the setting, press or repeatedly until the setting you want appears. In this example, we chose “Mode1.”

PIN Mode: Mode1

Press ENTER.

Note:

Note:

7

4

Beyond the basics

3 Use the numeric keypad to enter the four-digit passcode. In our example here, we enter 6296.

Passcode :6296

Note: If you enter an invalid passcode, the machine’s security feature will abort the operation.

PIN to

Passcode :****

2 Use the numeric keypad to enter the four-digit passcode. Here, we will use our sample passcode again.

Passcode :6296

3 Press ENTER. The LCD shows briefly:

Enter PIN Number

and then it shows:

_

4 Use the numeric keypad (including either * or #, if necessary) to enter the desired PIN, up to eight characters in length.

1057_

5 Press ENTER to save the PIN.

Note: If you press ENTER without entering the PIN, the fax machine beeps, indicates “Invalid Number” on the LCD and then returns you to step 4.

Now you may autodial the number as usual.

Important: While in PIN Mode 1, any autodialer numbers you use must include the PIN. This also applies to autodialer numbers used with programmable one-touch keys (see pages 2.28–2.35).

If you specified “Mode 2”

In this mode, you do not have to add the PIN to the autodialer setting. Instead, you enter the PIN manually each time you autodial:

1 Enter a speed-dial number.

Here, we have enter speed-dial number 01:

S01_

2 Press START. (If you used a one-touch key, you don’t need to press START.) The LCD shows briefly:

Enter PIN Number

and then it shows:

_

The machine now asks for the PIN.

3 Use the numeric keypad to enter the PIN.

1057_

4 Press ENTER. Your machine will dial the number.

2.40