Muratec F-65 operating instructions 01Box Name, 03Sub-Address#, 54321#, Sub-Addr. In Use

Beyond the basics

Note: If you enter an invalid I.D. code, the fax machine will reject the attempt and abort this operation.

6 The LCD now shows briefly:

01:Box Name

then it will show either:

_ABCDEF > or _ABCDEF > Murat

The machine is now prompting you for a name for this F-code box.

If you want to enter or change this F-code box’s name, proceed to step 7. If you do not want to enter or change this box’s name, skip to step 8.

7 An F-code box’s name may be up to 16 characters in length. You enter the name the same way you entered your fax name during EasyStart. We will review the process, here.

On the LCD, you will see the char- acter set currently available, such as:

_ABCDEF >

To find a different character, press 2 or 8 repeatedly to scroll through character sets until you see the one you want.

If you need to insert a space, one can be found before and after each set of characters.

When you see the character you want:

•Press either 4 or 6 to move the cursor to the character you want.

•Then press 5 to enter that character and move on to the next entry.

Note: If you make a mistake, just press CANCEL to erase to the left. Then continue to enter the character(s) you want.

Note: As you enter characters, the LCD will scroll to the left so you can view entries longer than five characters.

8 Press ENTER to save the box’s name. The LCD shows briefly:

03:Sub-Address#

then it will show either:

_ or 123456_

The machine is asking for this F-code box’s ITU-Tsubaddress.

You must enter a subaddress here in order to use this F-code box, and anyone trying to fax to this F-code box must know it.

To enter or change the subaddress number, proceed to step 9.

If you do not want to change an existing subaddress number, skip to step 10.

9 Use the numeric keypad to enter the exact subaddress for this F-code box. Note: The subaddress must be unique to this F-code box; i. e., no other

F-code box in this fax machine can have the same subaddress.

This ITU-Tsubaddress can be up to 20 characters in length and can include any combination of numbers and the * and # symbols (but no other non- numerical characters). In this example, we enter 6*54321#.

6*54321#_

Note: To erase previously entered numbers, press CANCEL to erase to the left. Or to change just one character in the number, press to move the cursor to the left, or to move it to the right, to that character Press CANCEL to erase it. Then re-enter the number until it is just as you want it.

10 Press ENTER to store it.

Note: If you entered a sub-address number already being used by another F-code box, the machine will beep and briefly display the following:

Sub-Addr. In Use

The machine now returns you to step 9. Enter a different number for your F-code box’s subaddress.

2.22