Muratec F-65 Fixing unsatisfactory printout quality, Other with isopropyl alcohol

Just in case …

Fixing unsatisfactory printout quality

If you notice poor printout quality (whether on received faxes or on copies), here’s what to do:

1 Unplug the power cord of your machine from the power source.

2 Get two soft, lint-free cloths and moisten them as follows:

•One with a cleaner suitable for use on platen/rubber rollers

•The other with isopropyl alcohol

3 Open the top cover and lift the ink film cartridge straight up out of the machine.

4 Use the cloth with the iso- propyl alcohol to clean the thermal print head.

Important: Do not touch the thermal print head directly with your hand.

Thermal print head

5 Use the cloth with platen/rub- ber roller cleaner to clean the face of the rollers. Rotate the rollers by hand to allow clean- ing of the entire roller surface.

6 Hold the cartridge over your fax machine. Position the car- tridge so that its arrow mark are over the machine’s arrow mark. (The side with the sup- ply roll should be over the front of the machine.)

Platen roller

7 Gently put the cartridge back into the fax machine. If you have positioned it correctly (see step 6), it will “drop” in smoothly.

Important: Your fax machine will not work if the cartridge is not inserted properly.

8 Gently close the top cover, pressing firmly on both sides of the top cover until you hear it click.

Important: Your fax machine will not work if the top cover is not closed.

3.10