Beyond the basics

6 Press ENTER. The LCD shows briefly:

Enter Fax Number

7

8

then it will show:

_

Enter the fax number either by pressing a one-touch key, entering a speed- dial number or dialing from the numeric keypad. Do not press START.

What you do now depends upon when you want the transmission to begin.

To have it begin now, skip to step 11.

To delay it, proceed to step 9.

9 Press COM-OPTIONS,COM-OPTIONS,ENTER.

The LCD shows the current day and time:

Time : 15/17:05

10 Use the numeric keypad to enter the day and time when the transmission should begin, then press ENTER.

Note: If you make a mistake, press to move the cursor to the left, or to move it to the right, to that character. Then re-enter until the number is just as you want it.

11 Press START.

If you chose an immediate transmission in step 8, your fax machine will begin dialing. If you chose a delayed command, the machine will display

** Reserved **” on the LCD, indicating that the machine has stored the command in memory and will perform it later.

Note: The ITU-Tsubaddress and password can be up to 20 characters in length and can include any combination of numbers and the * and # symbols. Do not include other non-numerical characters).

Note: To change a number you have already entered:

Press to move the cursor to the left or to move it to the right, to that character.

Press CANCEL to erase the character.

Enter the digit(s) you want.

2.27

Page 62
Image 62
Muratec F-65 operating instructions Beyond the basics Press ENTER. The LCD shows briefly