Muratec F-65 Phoning via speed-dial, Erasing a speed-dial number, Erase Speed-Dial

Beyond the basics

Phoning via speed-dial

To dial a phone call using a speed-dial number:

1 Obtain a dial tone by doing one of the following:

•Lifting the handset

•Press MONITOR/CALL to use the monitor speaker

**Tel Mode **

2 Press SPEED DIAL/TEL INDEX. The LCD shows:

S_

3 Use the numeric keypad to enter the two-digit identifier (such as 05, in this example) for the speed-dial number you want to dial. The LCD shows:

9-1-555-9292039_

Note: Remember that your fax machine’s monitor speaker is not a speakerphone. If you dial by using the monitor speaker, pick up the handset to speak to the person that answers the call.

Note: You can also use this method to dial a fax call if you want to hear the other machine’s fax tones. To do this, make sure there is a document in the feeder.) When you hear those tones over either your handset or the monitor speaker, press START to send the document in the feeder. If you are using the handset, hang it up at this point.

Erasing a speed-dial number

1 Press PROGRAM, B, 2.

Erase Speed-Dial

2 Press ENTER. The LCD shows:

01:No Number or 01:555-584-6950

If 01 is the speed-dial number you want to erase, skip to step 4. (However, our examples from here will say “05” rather than “01.”)

3 Use the numeric keypad to enter the two-digit identifier for the speed-dial number you want to erase. Here, we select 05:

05:555-987-6543

4 If you change your mind and want to erase a different speed-dial number, repeat steps 3 through 5.

5 Press ENTER. The LCD shows:

Check Prog/Enter

Important: If you want to quit without erasing the speed-dial number you have selected, press PROGRAM. The fax will return to step 3.

6 Press ENTER to erase the number.

** Complete **

To erase another speed-dial number, repeat steps 3–6. Or press STOP to return to the standby mode.

Printing a list of your speed-dial numbers

You can easily print a list of your speed-dial numbers. The list includes each number’s two-digit identifier, the Location ID, the phone or fax number and any group num- bers you may have stored.

To print the list, press PROGRAM, B, 3, ENTER.

2.12