Muratec F-65 Setting the language, Printing your settings, Printing a program list, Núm Una-Tecla

Beyond the basics

Setting the language

While English is the language which your machine initially uses to display messages and print reports, you can set it to “speak” French or Spanish, too!

To make the change from one language to the next, press PROGRAM, #.

¿Qué es? — or, What is it?

If you aren’t sure which language is showing after you’ve made a language change, press PROGRAM once and decide based on what appears on the LCD:

Num.	Une-Touche	is French.
Núm.	Una-Tecla	is Spanish.

If the language you see is the one you want, press STOP to return to standby mode.

If you want to change languages, press STOP to return to standby mode and then press PROGRAM, # to go to the next language in the cycle.

Printing your settings

After you enter your settings, print a settings list.

With this list, you can quickly check all the settings without having to check them on the machine.

Note: Please refer to the index at the end of these instructions to locate any set- ting you do not recognize or understand.

To print the settings list, press PROGRAM, J, 2, 1, ENTER.

Printing a program list

Your machine can also print a program list. This list gives a brief summary of instructions available on your fax machine, organized in a “program tree” so you can see which key combinations produce which instructions.

Note: Please refer to the index at the end of these instructions to locate any set- ting you do not recognize or understand.

To print a program list, press PROGRAM, *, 8. Your machine will print the list.

2.6