SETUP MENU
How to enter the setup menu to change settings
SETUP MENU
User system settings table
Press [MENU] to enter the main menu.. Press [SETUP] to enter the setup menu..
Press [Next] or [Back] to page through the settings (the setting is displayed in the message center)..
Press 
or 
to adjust the setting. (Selected option flashes..)
Press [DONE] to save and exit, or [CANCEL] to exit without saving..
The thermostat will discard changes and exit if nothing is pressed within 60 seconds..
The following table is the list of the settings and their details. Default settings are shown in bold..
System setting | Description | Factory default setting (bold) and setting range |
|
|
|
HUMIDISTAT MODE | (only available if controller type | HUMIDIFY |
| is set to humidistat) | DEHUMIDIFY |
|
| AUTO |
|
| OFF |
TEMPERATURE SCALE | Set the thermostat to Fahrenheit | FAHRENHEIT |
| or Celsius mode | CELSIUS |
AUTO DAYLIGHT | Enable or disable auto daylight | MARCH – Second Sunday in March to the first Sunday |
SAVINGS | savings | in November |
|
| APRIL – First Sunday in April to the last Sunday in October |
|
| OFF |
MESSAGE CENTER
(SCROLLING TEXT)
20
BACKLIGHT INTENSITY | Backlight intensity as a | 100 PERCENT |
| percentage of full on | Selection of 0 – 100% |
EVENTS PER DAY | Number of program events | FOUR EVENTS PER DAY |
| per day | TWO EVENTS PER DAY |
SECURITY | Enable PIN code security feature | DISABLED |
| (only available if enabled in | ENABLED |
| installer setup) |
|
SECURITY PIN | Sets security PIN code. The | #### |
| thermostat can also be accessed | |
| with the master PIN 7777 (only |
|
| available if Security is enabled) |
|
21
